Bosch LTC 8500 Instruction Manual Page 21
- Page / 104
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
LTC 8780 Series Data Converter Units
EN | 11
6.14 LTC 8780 Series Data Converter Units
The LTC 8780 Series are accessory units that convert the Allegiant system's biphase
control code into RS-232, or converts RS-232 back to biphase code. This provides
the capability of transmitting the control code over conventional RS-232 transmis-
sion mediums such as phone modems, fiber optics, microwaves, etc. The unit will
accept the Biphase control code generated by an Allegiant main CPU bay, an
LTC 8568/00 Signal Distribution unit, or an output from an LTC 8569, an
LTC 8570, an LTC 8571, or an LTC 8572 Series Code Merger unit.
6.15 LTC 8781 Series Data Converter Units
The LTC 8781 Series are accessory units that decode the Allegiant system's encoded
time/date information generated on the biphase control code line and convert it into
an RS-422 GPS format. This time/date information can be used to interface into
external time/date inserter products (such as the Kalatel KTS-53-16), which are
designed to be synchronized via a GPS signal.
6.16 LTC 8016/90 Bilinx™ Data Interface Unit
The LTC 8016/90 Allegiant Bilinx Data Interface unit is an accessory used for com-
municating over-the-coax, with up to 16 Bilinx-capable AutoDome and/or Dinion™
Series cameras. The LTC 8016 provides complete control of pan/tilt/zoom, auxilia-
ries, and pre-position functions of Bilinx enabled AutoDome Series cameras. In
addition, complete programming of Dinion Series cameras and AutoDomes via
their on-screen menus is supported. Bilinx technology also supports camera-gener-
ated event reporting to the Allegiant. This connection allows remote alarm inputs
and motion event data to be sent by the camera to the Allegiant without the need
for additional wiring between the camera site and the main control location. The
LTC 8016 can also be used to transmit Bilinx communications over a number of
video transmission systems. Example devices include fiber optic links and external
balun devices that use CAT5 twisted pair cables for video communication.
6.17 LTC 8785 Series Code Converters
The LTC 8785 Series code converter units are designed for use in older Allegiant
systems that have been upgraded to support 'variable speed' control code protocol.
The LTC 8785 units are used to provide a source of 'fixed speed' control code when
the system is generating the newer 'variable speed' control code preferred by the
AutoDome Series of PTZ cameras. The LTC 8785 would receive the variable speed
control code from the Allegiant via its LTC 8568/00 Signal Distribution unit and
convert it into the appropriate fixed speed control code. The 'fixed speed' control
code outputs from the LTC 8785 Series connect to the older TC8561 Series receiver/
drivers using the existing field cabling.
6.18 LTC 8782 Series Code Translator Units
The LTC 8782 Series Code Translators are accessory units that convert biphase code
to other manufacturers’ control codes, or convert other manufacturers’ codes to
- LTC 8500 Series 1
- Important Safeguards 3
- Safety Precautions 4
- Sécurité 5
- Sicherheitshinweise 5
- Precauciones de Seguridad 5
- Veiligheidsmaatregelen 6
- Sicurezza 6
- Medidas de Segurança 6
- 1Unpacking 11
- 2Service 12
- 3Description 13
- 5System Components 17
- 6System Accessory Components 18
- 6.5 LTC 8555 Series Keyboards 19
- 6.9 AutoDome Series 19
- Integration Server 22
- 6.23 Logging Printer 24
- Logging Printer 25
- 7Installation Procedure 26
- 7. 3Video Output Modules 27
- 7. 4CPU Module 27
- Baud rate -- 19,200 29
- Stop bits -- 1 29
- Data bits -- 8 29
- Parity -- None 29
- Central 31
- Control 31
- Configurations 35
- 10 Feature Selection 37
- 11 Main Power Connections 38
- 12 Video Monitor Display 39
- System Status Display 40
- 13 Factory Default Settings 43
- Lower CPU DIP Switch S1002 44
- S1002 DIP Switch Function 44
- Stop Bits 1 1 1 47
- Data Bits 8 8 8 47
- Parity None None None 47
- Handshake Yes No No 47
- 14 User Information 48
- 15 Alarm Information 50
- 15.6 Sample Alarm Responses 51
- Sequence & Display Mode 52
- 15.7 Alarm Relay Response 53
- 16 Keyboard Operation 54
- 16.3 Switcher Commands 55
- 16.5 Alarm Commands 57
- 16.6 Sequence Control 58
- Run a Sequence 59
- Stop a Running Sequence 59
- 16.7 Sequence Programming 60
- Sequence Function Summary 61
- 17 Keyb oard User Functions 63
- User Function 7 - Set Time 67
- User Function 8 - Set Date 67
- 18 Maintenance Information 75
- 18.3 AC Line Fuse Replacement 76
- 20 Error Messages 80
- 21 Troubleshooting Guide 83
- 21.5 No Alarm Response 84
- 22 Glossary of Terms 86
- Appendix A Satellite Systems 88
- Monitor 92
- Output(s) 92
- Input(s) 92
- CPU Software Version Numbers 93
- C.1 Main Bay Video 96
- C.2 Keyboards 96
- C.3 Alarm Interface Unit 96
- C.4 Signal Distribution Unit 97
- C.5 Receiver/Drivers 97
- Console Port RS-232 Pin-outs 98
- Alarm Port RS-232 Pin-outs 98
- Keyboard RS-485 Ports 98
- Printer Port RS-232 Pin-outs 98
- Code Port Pin-outs 99
- COMM PORT 1 and COMM PORT 2 99
Related products and manuals for Security access control systems Bosch LTC 8500
(20 pages)
(24 pages)
(96 pages)© 2020, manymanuals.com. All rights reserved. | 0.262 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals