Bosch NDN-733 FW5.6 User Manual Page 107
- Page / 111
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
114 en | Service Camera Browser Interface
AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems
3. Click Upload to begin transferring the file to the device.
The progress bar allows monitoring of the transfer.
The new firmware is unpacked and the Flash memory is
reprogrammed. The time remaining is shown by the message
going to reset Reconnecting in ... seconds. When the upload is
completed successfully, the device reboots automatically.
If the operating status LED lights up red, the upload has failed
and must be repeated. To perform the upload, switch to a
special page:
1. In the address bar of your browser, enter /main.htm after
the device IP address, for example:
192.168.0.10/main.htm
2. Repeat the upload.
15.1.3 Configuration
Save configuration data for the camera to a computer and load
saved configuration data from a computer to the device.
To load configuration data from the computer to the device:
1. Click Load From...; a dialog box appears.
2. Locate and open the desired configuration file.
Make certain that the file to be loaded comes from the
same device type as the device to be reconfigured. The
progress bar allows monitoring of the transfer.
To save the camera settings:
1. Click Save As...; a dialog box appears.
2. Enter a file name if required and save.
15.1.4 SSL certificate
To work with an SSL connection, both sides of the connection
must have the appropriate certificates. Upload one or more
certificate files, one at a time, to the camera.
1. Enter the full path of the file to upload or click Browse... to
locate the file.
2. Click Upload to start the file transfer.
- Camera Browser Interface 1
- Table of Contents 3
- 1 Browser connection 11
- 1.3 Protected network 12
- 2 System Overview 13
- 3 Operation via the browser 14
- 3.1.2 Status icons 15
- 3.1.4 View Control ROI 17
- 3.1.6 System Log / Event Log 19
- 3.1.7 Saving snapshots 19
- 3.1.10 Audio communication 20
- 3.1.11 Processor load 20
- 3.2 Playback page 21
- 3.2.2 Exporting tracks 22
- 3.2.3 Searching for tracks 22
- 3.2.4 Controlling playback 23
- 4 Settings Overview 25
- 4.2 Settings 26
- 5Basic Mode 27
- 5.2 Date/Time 29
- 5.3 Network 30
- 5.4 Encoder 31
- 5.5 Audio 31
- 5.6 Recording 31
- 5.7 System Overview 31
- 6 Advanced General Settings 32
- 6.2 Password 33
- 6.3 Date/Time 34
- 6.3.5 Time server IP address 35
- 6.3.6 Time server type 35
- 6.4 Display Stamping 36
- 6.4.5 Alarm message 37
- 6.4.6 Video watermarking 37
- 7 Web Interface 38
- 7.1.6 Show overlay icons 39
- 7.1.7 Select video player 39
- 7.2 LIVEPAGE Functions 40
- 7.2.7 Allow snapshots 41
- 7.2.8 Allow local recording 41
- 7.2.9 I-frames-only stream 41
- 7.2.10 Show auto tracker 41
- 7.3 Logging 42
- 8 Camera 43
- 8.2 Lens Wizard 44
- 8.3 Mode menu 45
- 8.4 Color 47
- 8.5.1 Exposure/frame rate 48
- 8.5.2 Day/night 49
- 8.6 Enhance 50
- 8.7 Encoder Settings 51
- 8.8 Privacy Masks 52
- 8.9 Audio 52
- 8.10 Pixel Counter 52
- 9 Encoder Settings 53
- 9.1 Encoder Profile 54
- 9.1.9 Default 57
- 9.2 Encoder Streams 58
- 9.2.2 JPEG stream 59
- 9.3 Encoder Regions 60
- 10 Recording 61
- 10.1 Storage Management 62
- 10.2 Recording Profiles 66
- 10.2.2 Standard recording 67
- 10.3 Retention Time 68
- 10.4 Recording Scheduler 69
- 10.4.3 Profile names 70
- 10.4.4 Activate recording 70
- 10.4.5 Recording status 70
- 10.5 Recording Status 71
- 11 Alarm 72
- 11.1.5 Video transmission 73
- 11.1.6 Stream 73
- 11.1.7 Remote port 73
- 11.1.8 Video output 73
- 11.1.9 Decoder 73
- 11.1.10 SSL encryption 74
- 11.1.11 Auto-connect 74
- 11.1.12 Audio 74
- 11.3 Audio Alarm 76
- 11.4 Alarm E-Mail 77
- 11.4.8 Destination address 78
- 11.4.9 Sender name 78
- 11.4.10 Test e-mail 78
- 11.5 Alarm Task Editor 79
- 12 Setting up VCA 80
- 12.2 VCA - Profiles 81
- 12.2.3 Motion detector 82
- 12.2.4 Tamper detection 83
- 12.3 VCA - Scheduled 87
- 12.4 VCA - Event triggered 89
- 13 Interfaces 90
- 13.3 COM1 91
- 14 Network 92
- 14.1.3 IP V6 address 93
- 14.1.4 DNS server address 93
- 14.1.5 Video transmission 93
- 14.1.6 TCP rate control 93
- 14.1.7 HTTP browser port 93
- 14.1.8 HTTPS browser port 94
- 14.1.9 RCP+ port 1756 94
- 14.1.10 Telnet support 94
- 14.1.11 Interface mode ETH 94
- 14.1.12 Network MSS [Byte] 94
- 14.1.21 Notification mail 96
- 14.1.22 Status 96
- 14.2 Advanced 97
- 14.2.5 RTSP port 98
- 14.2.6 UPnP 98
- 14.2.7 TCP metadata input 98
- 14.2.8 Quality of service 98
- 14.2.9 Cloud-based services 99
- 14.3 Multicast 100
- 14.3.3 Port 101
- 14.3.4 Streaming 101
- 14.3.5 Multicast packet TTL 101
- 14.4 Image Posting 102
- 14.4.2 Face detection 103
- 14.5 Accounts 104
- 14.7 Encryption 105
- 14.6 IP V4 filter 105
- 15 Service 106
- 15.1.3 Configuration 107
- 15.1.4 SSL certificate 107
- 15.2 Licenses 108
- 15.3 System Overview 108
- Bosch Security Systems 111
Related products and manuals for Security access control systems Bosch NDN-733 FW5.6
(98 pages)
(12 pages)© 2020, manymanuals.com. All rights reserved. | 0.626 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals