Bosch NDN-733 FW5.6 User Manual download pdf (Page 49)

50 en | Camera Camera Browser Interface

AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems

8.5.2 Day/night

Auto - the camera switches the IR cut-off filter on and off

depending on the scene illumination level.

Color - the camera always produces a color signal regardless of

light levels.

Monochrome - the IR cut-off filter is removed, giving full IR

sensitivity.

Switch level

Set the video level at which the camera in Auto mode switches

to monochrome operation (-15 to 0 to +15).

A low (negative) value means that the camera switches to

monochrome at a lower light level. A high (positive) value

means that the camera switches to monochrome at a higher

light level.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 110 111

Camera Browser Interface 1
Table of Contents 3
1 Browser connection 11
1.3 Protected network 12
2 System Overview 13
3 Operation via the browser 14
3.1.2 Status icons 15
3.1.4 View Control ROI 17
3.1.6 System Log / Event Log 19
3.1.7 Saving snapshots 19
3.1.10 Audio communication 20
3.1.11 Processor load 20
3.2 Playback page 21
3.2.2 Exporting tracks 22
3.2.3 Searching for tracks 22
3.2.4 Controlling playback 23
4 Settings Overview 25
4.2 Settings 26
5Basic Mode 27
5.2 Date/Time 29
5.3 Network 30
5.4 Encoder 31
5.5 Audio 31
5.6 Recording 31
5.7 System Overview 31
6 Advanced General Settings 32
6.2 Password 33
6.3 Date/Time 34
6.3.5 Time server IP address 35
6.3.6 Time server type 35
6.4 Display Stamping 36
6.4.5 Alarm message 37
6.4.6 Video watermarking 37
7 Web Interface 38
7.1.6 Show overlay icons 39
7.1.7 Select video player 39
7.2 LIVEPAGE Functions 40
7.2.7 Allow snapshots 41
7.2.8 Allow local recording 41
7.2.9 I-frames-only stream 41
7.2.10 Show auto tracker 41
7.3 Logging 42
8 Camera 43
8.2 Lens Wizard 44
8.3 Mode menu 45
8.4 Color 47
8.5.1 Exposure/frame rate 48
8.5.2 Day/night 49
8.6 Enhance 50
8.7 Encoder Settings 51
8.8 Privacy Masks 52
8.9 Audio 52
8.10 Pixel Counter 52
9 Encoder Settings 53
9.1 Encoder Profile 54
9.1.9 Default 57
9.2 Encoder Streams 58
9.2.2 JPEG stream 59
9.3 Encoder Regions 60
10 Recording 61
10.1 Storage Management 62
10.2 Recording Profiles 66
10.2.2 Standard recording 67
10.3 Retention Time 68
10.4 Recording Scheduler 69
10.4.3 Profile names 70
10.4.4 Activate recording 70
10.4.5 Recording status 70
10.5 Recording Status 71
11 Alarm 72
11.1.5 Video transmission 73
11.1.6 Stream 73
11.1.7 Remote port 73
11.1.8 Video output 73
11.1.9 Decoder 73
11.1.10 SSL encryption 74
11.1.11 Auto-connect 74
11.1.12 Audio 74
11.3 Audio Alarm 76
11.4 Alarm E-Mail 77
11.4.8 Destination address 78
11.4.9 Sender name 78
11.4.10 Test e-mail 78
11.5 Alarm Task Editor 79
12 Setting up VCA 80
12.2 VCA - Profiles 81
12.2.3 Motion detector 82
12.2.4 Tamper detection 83
12.3 VCA - Scheduled 87
12.4 VCA - Event triggered 89
13 Interfaces 90
13.3 COM1 91
14 Network 92
14.1.3 IP V6 address 93
14.1.4 DNS server address 93
14.1.5 Video transmission 93
14.1.6 TCP rate control 93
14.1.7 HTTP browser port 93
14.1.8 HTTPS browser port 94
14.1.9 RCP+ port 1756 94
14.1.10 Telnet support 94
14.1.11 Interface mode ETH 94
14.1.12 Network MSS [Byte] 94
14.1.21 Notification mail 96
14.1.22 Status 96
14.2 Advanced 97
14.2.5 RTSP port 98
14.2.6 UPnP 98
14.2.7 TCP metadata input 98
14.2.8 Quality of service 98
14.2.9 Cloud-based services 99
14.3 Multicast 100
14.3.3 Port 101
14.3.4 Streaming 101
14.3.5 Multicast packet TTL 101
14.4 Image Posting 102
14.4.2 Face detection 103
14.5 Accounts 104
14.7 Encryption 105
14.6 IP V4 filter 105
15 Service 106
15.1.3 Configuration 107
15.1.4 SSL certificate 107
15.2 Licenses 108
15.3 System Overview 108
Bosch Security Systems 111

Comments to this Manuals

No comments

Bosch NDN-733 FW5.6 User Manual Page 49

Comments to this Manuals

Related products and manuals for Security access control systems Bosch NDN-733 FW5.6