Bosch NDN-733 FW5.6 User Manual Page 89
- Page / 111
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
96 en | Setting up VCA Camera Browser Interface
AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems
12.4 VCA - Event triggered
This configuration allows you to stipulate that the video content
analysis is only to be activated when triggered by an event.
In the VCA configuration drop-down list, select Event
triggered.
As long as no trigger is activated, the Silent MOTION+
configuration in which metadata is created is active; this
metadata facilitates searches of recordings, but does not
trigger an alarm.
The current alarm status is displayed for information purposes.
12.4.1 Trigger
Select a physical alarm or a virtual alarm as a trigger. A virtual
alarm is created using software, with RCP+ commands or alarm
scripts, for example.
12.4.2 Trigger active
Select the VCA configuration here that is to be enabled via an
active trigger. A green check mark to the right of the list field
indicates that the trigger is active.
12.4.3 Trigger inactive
Select the VCA configuration here that is to be activated if the
trigger is not active. A green check mark to the right of the list
field indicates that the trigger is inactive.
12.4.4 Delay [s]
Select the delay period for the reaction of the video content
analysis to trigger signals. The alarm is only triggered after a set
time interval in seconds has elapsed and then only if the
triggering condition still exists. If the original condition has
been restored before this time interval elapses, the alarm is not
triggered. A delay period may be useful in avoiding false alarms
or frequent triggering. During the delay period, the Silent VCA
configuration is always enabled.
- Camera Browser Interface 1
- Table of Contents 3
- 1 Browser connection 11
- 1.3 Protected network 12
- 2 System Overview 13
- 3 Operation via the browser 14
- 3.1.2 Status icons 15
- 3.1.4 View Control ROI 17
- 3.1.6 System Log / Event Log 19
- 3.1.7 Saving snapshots 19
- 3.1.10 Audio communication 20
- 3.1.11 Processor load 20
- 3.2 Playback page 21
- 3.2.2 Exporting tracks 22
- 3.2.3 Searching for tracks 22
- 3.2.4 Controlling playback 23
- 4 Settings Overview 25
- 4.2 Settings 26
- 5Basic Mode 27
- 5.2 Date/Time 29
- 5.3 Network 30
- 5.4 Encoder 31
- 5.5 Audio 31
- 5.6 Recording 31
- 5.7 System Overview 31
- 6 Advanced General Settings 32
- 6.2 Password 33
- 6.3 Date/Time 34
- 6.3.5 Time server IP address 35
- 6.3.6 Time server type 35
- 6.4 Display Stamping 36
- 6.4.5 Alarm message 37
- 6.4.6 Video watermarking 37
- 7 Web Interface 38
- 7.1.6 Show overlay icons 39
- 7.1.7 Select video player 39
- 7.2 LIVEPAGE Functions 40
- 7.2.7 Allow snapshots 41
- 7.2.8 Allow local recording 41
- 7.2.9 I-frames-only stream 41
- 7.2.10 Show auto tracker 41
- 7.3 Logging 42
- 8 Camera 43
- 8.2 Lens Wizard 44
- 8.3 Mode menu 45
- 8.4 Color 47
- 8.5.1 Exposure/frame rate 48
- 8.5.2 Day/night 49
- 8.6 Enhance 50
- 8.7 Encoder Settings 51
- 8.8 Privacy Masks 52
- 8.9 Audio 52
- 8.10 Pixel Counter 52
- 9 Encoder Settings 53
- 9.1 Encoder Profile 54
- 9.1.9 Default 57
- 9.2 Encoder Streams 58
- 9.2.2 JPEG stream 59
- 9.3 Encoder Regions 60
- 10 Recording 61
- 10.1 Storage Management 62
- 10.2 Recording Profiles 66
- 10.2.2 Standard recording 67
- 10.3 Retention Time 68
- 10.4 Recording Scheduler 69
- 10.4.3 Profile names 70
- 10.4.4 Activate recording 70
- 10.4.5 Recording status 70
- 10.5 Recording Status 71
- 11 Alarm 72
- 11.1.5 Video transmission 73
- 11.1.6 Stream 73
- 11.1.7 Remote port 73
- 11.1.8 Video output 73
- 11.1.9 Decoder 73
- 11.1.10 SSL encryption 74
- 11.1.11 Auto-connect 74
- 11.1.12 Audio 74
- 11.3 Audio Alarm 76
- 11.4 Alarm E-Mail 77
- 11.4.8 Destination address 78
- 11.4.9 Sender name 78
- 11.4.10 Test e-mail 78
- 11.5 Alarm Task Editor 79
- 12 Setting up VCA 80
- 12.2 VCA - Profiles 81
- 12.2.3 Motion detector 82
- 12.2.4 Tamper detection 83
- 12.3 VCA - Scheduled 87
- 12.4 VCA - Event triggered 89
- 13 Interfaces 90
- 13.3 COM1 91
- 14 Network 92
- 14.1.3 IP V6 address 93
- 14.1.4 DNS server address 93
- 14.1.5 Video transmission 93
- 14.1.6 TCP rate control 93
- 14.1.7 HTTP browser port 93
- 14.1.8 HTTPS browser port 94
- 14.1.9 RCP+ port 1756 94
- 14.1.10 Telnet support 94
- 14.1.11 Interface mode ETH 94
- 14.1.12 Network MSS [Byte] 94
- 14.1.21 Notification mail 96
- 14.1.22 Status 96
- 14.2 Advanced 97
- 14.2.5 RTSP port 98
- 14.2.6 UPnP 98
- 14.2.7 TCP metadata input 98
- 14.2.8 Quality of service 98
- 14.2.9 Cloud-based services 99
- 14.3 Multicast 100
- 14.3.3 Port 101
- 14.3.4 Streaming 101
- 14.3.5 Multicast packet TTL 101
- 14.4 Image Posting 102
- 14.4.2 Face detection 103
- 14.5 Accounts 104
- 14.7 Encryption 105
- 14.6 IP V4 filter 105
- 15 Service 106
- 15.1.3 Configuration 107
- 15.1.4 SSL certificate 107
- 15.2 Licenses 108
- 15.3 System Overview 108
- Bosch Security Systems 111
Related products and manuals for Security access control systems Bosch NDN-733 FW5.6
(98 pages)
(12 pages)© 2020, manymanuals.com. All rights reserved. | 3.612 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals