Bosch BasicDome Series Instruction Manual download pdf (Page 16)

Indoor Pendant & In-ceiling Models | Instruction Manual | Advanced Menu

Bosch Security Systems | 10 December 2003

7 ADVANCED MENU

MAIN MENU

This enhanced software makes programming and

customizing your BasicDome easy. All settings can be

edited using the Main Menu. To enter the Main Menu,

press ON-46-ENTER. You then simply follow the

on-screen commands to edit the settings. Remember,

to access this feature, the system must be unlocked

using OFF-90-ENTER.

CAMERA SETUP

White Balance – A camera function that maintains proper color reproduction as the color temperature of the scene changes

(i.e. daylight, flourescent). The Factory Default* setting is AUTOMATIC.

Choices:

Extended WB . . . . . .Camera adjusts color using extended range.

*Automatic WB . . . . .Camera constantly adjusts the color.

Indoor WB . . . . . . . . .Camera optimizes color for typical indoor conditions.

Outdoor WB . . . . . . .Camera optimizes color for typical outdoor conditions.

One Push WB . . . . . .Sets the camera’s color settings for the current scene. Zoom on a well lit, white object

(i.e. a white wall or paper) before activating.

Gain Control – Electronically brightens darker scenes which may cause graininess in low light scenes. The Factory Default*

setting is AUTO.

Choices:

Off . . . . . . . . . . . . . . . .Camera uses only the IRIS to adjust to low light.

*Auto . . . . . . . . . . . . . .Camera adds electronic gain based on lighting conditions.

Max Gain Level – Adjusts the maximum gain level that the Gain control will adjust to when set to AUTO.

Choices: . . . . . . . . . . . . . .Sliding Scale from 1 to 6 (in 4 decibel gain steps).

Sharpness – Adjusts the sharpness/detail of the picture. The Factory Default* setting is at 6 on the sliding scale of about 16.

Choices: . . . . . . . . . . . . . .Sliding Scale from –(soft) to +(sharp).

Synch Mode – Sets the synch mode of the camera. The Factory Default* setting is LINE LOCK.

Choices:

Crystal . . . . . . . . . . . .Camera is synchronized to an internal crystal (recommended if there is noise on the power line)

*Line Lock . . . . . . . . .Camera is synchronized to AC power. This eliminates picture roll in multicamera systems.

Line Lock Delay – Optimizes LINE LOCK mode to eliminate picture roll in multiphase power applications. The Factory

Default* setting is 0.

Choices: . . . . . . . . . . . . . .Sliding Scale (–0° to 359°).

Backlight Compensation – Improves the image quality when the background has a high level of illumination.

Choices: . . . . . . . . . . . . . .On, Off.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

No comments

Bosch BasicDome Series Instruction Manual Page 16