Bosch BasicDome Series Instruction Manual download pdf (Page 22)

1.3Setting the Preset Tour period

To c hange the time duration between Presets during a

Preset Tour, type ON-15-ENTER and use the joystick for

adjustments (see FIGURE 4).

Figure 4: Preset Tour Period Adjustments

1.4 Record/Playback Tours

Two independent macros (series of commands) can be

recorded: A & B. These macros can be several hours in

duration, although tours involving constant commands

only last minutes. While recording, the on-screen display

(see FIGURE 5) indicates remaining memory. To begin

recording on A, move the camera to the desired starting

point, then type ON-100-ENTER. The BasicDome now

records all camera activities until the recording is ended

by OFF-100-ENTER. Once A has been recorded, B is

available via the ON/OFF-101-ENTER command.

Playback can be continuous (ON-50-ENTER FOR A,

ON-52-ENTER FOR B) or one shot (ON-51-ENTER

FOR A, ON-53-ENTERFOR B).

Figure 5: Recording

1.5 Changing AutoPan and AutoScan

Speeds

The AutoPan and AutoScan speeds (see FIGURE 6) can

be adjusted via ON-14-ENTER. Use the joystick to

adjust the speed. It is helpful for the Pan or Scan to be

active when entering ADJUST mode to see the speed

change.

Figure 6: AutoPan / AutoScan Speed Adjust

For additional information or the nearest Bosch

location, visit our web site at

www.boschsecuritysystems.com.

Indoor Pendant & In-ceiling Models | User Manual | On-Screen Programming

Bosch Security Systems | 10 December 2003

UM4

1 2 ... 17 18 19 20 21 22 23 24

No comments

Bosch BasicDome Series Instruction Manual Page 22