Bosch GOF 900 CE Professional User Manual download pdf (Page 16)

16 | English

1 619 929 J79 | (23.11.11) Bosch Power Tools

Intended Use

The machine is intended for routing grooves, edges, profiles

and elongated holes as well as for copy routing in wood, plas-

tic and light building materials, while resting firmly on the

workpiece.

With reduced speed and with appropriate routing bits, non-

ferrous alloys can also be machined.

Product Features

The numbering of the product features refers to the illustra-

tion of the machine on the graphics page.

1 Right handle (insulated gripping surface)

2 Lock-on button for On/Off switch

3 Thumbwheel for speed preselection

4 Spindle lock lever

5 Wing bolt for guide rods of parallel guide (2x)*

6 Chip shield

7 Router bit*

8 Seat for parallel guide rods

9 Guide plate

10 Step buffer

11 Adjusting screws for step buffer

12 Base plate

13 Dust boot

14 Wing bolt for depth stop adjustment

15 Depth stop

16 Slide with index mark

17 Left handle (insulated gripping surface)

18 Scale for depth-of-cut

19 Scale for depth-of-cut fine adjustment

20 Adjustment knob for depth-of-cut fine adjustment

21 Mark for zeroing

22 Release lever

23 Tightening nut with collet

24 On/Off switch

25 Open-end spanner, size 24 mm*

26 Extraction hose (Ø 35 mm)*

27 Extraction adapter*

28 Knurled screw for extraction adapter (2x)*

29 Parallel guide*

30 Guide rod for parallel guide (2x)*

31 Wing bolt for fine adjustment of parallel guide (2x)*

32 Wing bolt for coarse adjustment of

parallel guide (2x)*

33 Fine-adjustment knob for parallel guide*

34 Adjustable edge guide for parallel guide *

35 Extraction adapter for parallel guide*

36 Router compass/guide-rail adapter*

37 Router compass handle*

38 Wing bolt for coarse adjustment of

router compass (2x)*

39 Wing bolt for fine adjustment of

router compass (1x)*

40 Fine-adjustment knob for router compass*

41 Centring screw for compass stop *

42 Base spacer

(included in the “router compass” set)*

43 Guide rail*

44 SDS guide-bushing adapter

45 Fastening screw for guide bushing adapter (2x)

46 Release lever for guide bushing adapter

47 Guide bushing

48 Pan head screw for guide plate

49 Countersunk head screw for guide plate

50 Centring pin

*Accessories shown or described are not part of the standard de-

livery scope of the product. A complete overview of accessories

can be found in our accessories program.

Technical Data

Plunge router GOF 900 CE

Professional

GOF 1300 CE

Professional

Article number 0 601 614 6.. 0 601 613 6..

Rated power input

W9001300

No-load speed

min

-1

12000 – 24000 12000 – 24000

Speed preselection

z z

Constant electronic control

z z

Connection for dust extraction

z z

Tool holder

inch

6–8

6 – 12.7

¼–½

Plunge depth

mm 50 58

Weight according to EPTA-Procedure 01/2003

kg 3.5 4.8

Protection class

/II /II

The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.

Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.

OBJ_BUCH-203-004.book Page 16 Wednesday, November 23, 2011 9:50 AM

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 214 215

Comments to this Manuals

No comments

Bosch GOF 900 CE Professional User Manual Page 16

Comments to this Manuals

Related products and manuals for Tools Bosch GOF 900 CE Professional