Bosch WAU28460IN Installation Manual Page 32

  • Download
  • Add to my manuals
  • Print
  • Page
    / 48
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 31
en Additional programme settings
32
During the timer count-down, you can
add or remove laundry as required:
1. Press the A Start/Reload button.
2. Open the door and add or remove
laundry.
3. Close the door.
4. Press the A Start/Reload button.
Note: The length of the program is
automatically adjusted when the
program is running.
Certain factors can affect the program
length, e.g.:
Program settings,
Detergent dosage (additional rinse
cycles if required due to foaming),
Load size/type of textiles (longer
washing for higher load and for
textiles which absorb more water),
Imbalances (e. g. due to fitted
sheets) are offset with several start-
ups of spin cycles,
Fluctuations in power supply,
Water pressure (infeeding speed).
\ Additional programme
settings
Additional programme setti ngs
Note: You can find possible additional
programme settings in the overview;
these differ depending on the model.
Speed/Eco
(G/F Speed/Eco)
Button with two possible settings for
adapting the selected programme:
G Speed
Washing in a shorter time while
achieving a washing result that is
consistent with, but uses more
energy than, the selected
programme, without the G/F
Speed/Eco setting.
Note: Do not exceed the maximum
load.
F Eco
Energy-optimised washing by
reducing the temperature while
achieving a washing result that is
consistent with the selected
programme, without the G/F
Speed/Eco setting.
Select the button to do this. First of all,
you can select the G Speed setting. If
you select the button again, the F Eco
setting is active. The respective symbol
is shown in the display when the setting
is activated.
If you select the button again, no setting
is active.
Rinse Plus
(Ï Rinse Plus)
Additional rinse cycle depending on the
programme; longer programme length
for particularly sensitive skin and/or for
areas with very soft water.
Page view 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 47 48

Comments to this Manuals

No comments