Bosch WAU28460IN Installation Manual download pdf (Page 36)

en Operating the appliance

36

Childproof lock

(E 3sec.)

You can lock the washing machine to

prevent the functions you have set from

being changed inadvertently. To do this,

activate the childproof lock when the

program has started.

To activate/deactivate, press and hold

the 0 rpm and ñ Finished In buttons at

the same time after the washing

program has started. Keep pressing the

two buttons for approx. three seconds.

The E symbol appears in the display

panel.

■ E lights up: The childproof lock is

active.

■ E flashes: The childproof lock is

active and the program selector has

been adjusted. To deactivate the

childproof lock, reset the program

selector to the initial program. The

symbol lights up again.

Note: To avoid the program to

terminate, do not turn the program

selector beyond the Off position.

Note: The childproof lock remains

active after the program has ended and

the appliance is switched off. You must

always deactivate the childproof lock if

you want to start a new program.

Adding/removing laundry

Following the start of the program, you

can add or remove laundry as required.

Press the A Start/Reload button to do

this.

The A Start/Reload button indicator

lamp flashes and the machine checks

whether it is possible to add laundry.

If the following appears in the display

panel:

■ The Õ symbol disappears: adding

laundry is possible.

■ The Õ symbol lights up: it is not

possible to add laundry.

To continue the program, press the

button A Start/Reload. The program

continues automatically.

Notes

■ Do not leave the door open for too

long when adding laundry as water

from the laundry may leak out.

■ For safety reasons, the door remains

locked when the water level or

temperature is high, or while the

drum is turning, and it is not possible

to add laundry during this time.

■ The load display is not active during

reloading.

Changing the programme

1. Press the A Start/Reload button.

2. Select another program.

3. Press the A Start/Reload

button.The new program starts from

the beginning.

Cancel the programme

For programs at high temperature:

1. Press the A Start/Reload button.

2. To cool down laundry: Select

à Rinse.

3. Press the A Start/Reload button.

For programs at low temperature:

1. Press the A Start/Reload button.

2. Select 0 Spin.

3. Press the A Start/Reload button.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 47 48

Comments to this Manuals

No comments