Bosch Bosch 17e Installation Guide download pdf (Page 10)

ROBERT BOSCH (AUST) - EVERLAST HYDRO SYSTEMS WIRING PLAN PAGE 2 OF 2

APPLICATIONS : Commercial Process, Industrial or Dairy Industry etc. water heating to supply at 90 ºC.

TESTING : The pump will operate until the thermostat set temperature of the Everlast Storage Accumulator is reached. When testing the

thermostat there will be a CLOSED CIRCUIT between 1 and 2 until the thermostat set temperature is reached. This is a 240 V AC series application

without over temperature thermal cut out. This is intended for high water temperature delivery systems. Safety Pressure and Temperature Relief

Valves as specified in AG 102, must be installed into pipework.

Information on troubleshooting is found in the Pump and Gas Heater User Handbooks (provided with this Guide).

240 V AC

SUPPLY

ACTIVE NEUTRAL

RED + BLACK —

GD MAINS

TERMINAL CONNECTOR

EVERLAST HIGH

TEMP C2

THERMOSTAT

EW SERIES

SET UP TO 90 ºC

BROWN

GRUNDFOS

UPS TYPE

PUMP

WITH PUMP

SHAFT

HORIZONTAL

BLUE

BOSCH CONTINUOUS

FLOW WATER

HEATER OR

MULTIPLES.

MODELS 17E, 21E &

25E REQUIRE 240 V

AC. FOR ELECTRONIC

IGNITION. MAY BE

PROVIDED

THERE IS NO

ELECTRICAL

CONNECTION FROM

THE GAS UNIT TO

CIRCULATING PUMP

240 V AC

SUPPLY

GREEN/YELLOW

EARTH

RED

BOSCH – EVERLAST SCHEMATIC WIRING PLAN

COMBO HIGH TEMP MODEL

PAGE REV : 1

ROBERT BOSCH (AUST) PTY LTD www.bosch.com.au EVERLAST™ HYDRO SYSTEMS PTY LTD. www.everlastwaterheaters.com

1 2 ... 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Bosch Bosch 17e Installation Guide Page 10

Comments to this Manuals

Related products and manuals for Water heaters & boilers Bosch Bosch 17e