Bosch TIS30129RW Instruction Manual download pdf (Page 15)

Operating the appliance en

15

Water filter

Water filter

~ Fig. '

A water filter lessens limescale

deposits, reduces impurities in water

and improves the taste of the coffee.

Water filters are available from retailers

or from customer service.

Inserting or replacing a water filter

A new water filter must be rinsed before

it can be used.

The appliance is switched on. The water

tank has been filled.

1. Press and hold % and

Calc’nClean for at least 3 seconds.

2. Touch Espresso button, and "W.

hardness" will be activated.

3. Touch % button and make the

following selection:

4. Immerse the water filter (opening

facing up) in a container filled with

water until no more air bubbles rise

to the surface.

~ Fig. '

5. Then press the water filter firmly into

the empty water tank.

6. Fill the water tank with water up to

the "max" marking.

7. Place a container with a capacity of

1.0 litre under the outlet.

8. Touch Espresso button to save the

setting and activate rinsing.

9. Insert water tank.

10. Touch Espresso button to save the

setting and start rinsing. Water will

now flow through the filter.

11. Touch Calc’nClean button to exit the

menu.

12. Then empty the container. The

appliance is ready for use again.

Removing the water filter

If the water filter has been removed and

no new one inserted, please select the

appropriate water hardness. ~ "Setting

the water hardness" on page 17

Frost protection

To prevent frost damage during

transportation and storage, the

appliance must be completely emptied

beforehand.

Info: The appliance must be ready for

use and the water tank filled.

1. Place a large container under the

outlet of the milk frother and push

the frother down.

2. Press and hold Milk button for at

least 5 seconds.

The LED in the button flashes, and

the appliance now heats up.

3. As soon as steam escapes from the

milk frother, remove the water tank.

4. Allow the appliance to cool down.

Wait until ' symbol and all LEDs are

flashing.

5. Use k button to switch the

appliance off.

6. Empty the water tank and the drip

tray and thoroughly clean the

appliance.

The appliance can now be transported

or stored.

Note: The brewing unit is now secured

and cannot be removed.

with water filter

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 167 168

Comments to this Manuals

No comments