Bosch HKK99V850M Instruction Manual Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
15
Fully automatic programming
The oven can be programmed to the time at which the dish is
expected to be ready. The oven will switch itself on
automatically switch itself off again at the required time. This
means that you can, for example, place a dish in the oven in
the morning and program it so that the dish will be ready at
midday.
Make sure that food is not left in the cooking compartment for
too long as it may spoil.
1. Set the cooking time in accordance with the instructions for
programming the cooking time semi-automatically.
2. Set the end of the cooking time in accordance with the
instructions for programming the switch-off time semi-
automatically.
The oven will switch itself on at the right time for the cooking
time length and the switch-off time that have been set. The "A",
z and x symbols will light up and stay lit.
Once the oven has switched itself on, the "A" symbol and the
z symbol will light up permanently in the display.
The timer will emit an audible signal when oven switches off.
End of the cooking time
Use the "Mode" button to switch off the timer.
Cancelling programming
Pressing the "+" and "-" buttons at the same time for 2 seconds
will cancel any fully automatic or semi-automatic programmes
that have been set.
Note: This does not apply to timer volume setting.
Changing the audible signal
Pressing and holding the "-" button for 5 seconds while the
timer is showing the current time will make the clock issue a
warning signal. The clock has three different audible signals. A
different signal will sound each time the "-" button is pressed.
The last signal you selected is saved as the default tone.
Care and cleaning
With attentive care and cleaning, your hob and oven will retain
its looks and remain in good working order for a long time. We
will explain here how you should care for and clean them
correctly.
Notes
Slight differences in the colours on the front of the oven are
caused by the use of different materials, such as glass,
plastic and metal.
Shadows on the door panel which look like streaks, are
caused by reflections made by the oven light.
Enamel is baked on at very high temperatures. This can
cause some slight colour variations. This is normal and does
not affect operation. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
: Risk of electric shock!
Do not use any high-pressure cleaners or steam cleaners,
which can result in an electric shock.
: Risk of burns!
The appliance becomes very hot. Never touch the interior
surfaces of the cooking compartment or the heating elements.
Always allow the appliance to cool down. Keep children at a
safe distance.
Cleaning agents
Damage to the various different surfaces caused by using the
wrong cleaning agent can be avoided by observing the
following instructions.
When cleaning the hob do not use
undiluted washing-up liquid or dishwasher detergent,
scouring pads,
abrasive cleaning agents such as oven cleaner or stain
remover,
high-pressure cleaners or steam jets.
Do not clean individual parts in the dishwasher.
When cleaning the oven do not use
sharp or abrasive cleaning agents,
cleaning agent with a high alcohol content,
scouring pads,
high-pressure cleaners or steam jets.
Do not clean individual parts in the dishwasher.
Wash new sponges thoroughly before first use.
Zone Cleaning agent
Stainless steel sur-
faces*
(depending on
appliance model)
Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. On stainless steel surfaces,
always wipe parallel to the natural grain.
Otherwise, you may scratch the surface.
Remove patches and splashes of limes-
cale, grease, starch and albumin (e.g.
egg white) immediately. Corrosion can
form under such patches and splashes.
Special care products suitable for hot
stainless steel surfaces are available
from our after-sales service and from
specialist retailers. Apply a thin layer of
care product with a soft cloth.
Enamel, painted,
plastic and screen-
printed surfaces*
(depending on
appliance model)
Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. Do not use glass cleaner or
glass scrapers for cleaning.
Control panel Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. Do not use glass cleaner or
glass scrapers for cleaning.
Upper glass cover*
(depending on
appliance model)
Glass cleaner:
Clean with a soft cloth.
You can remove the upper glass cover
for cleaning. To find out how to do this,
please refer to the section Upper glass
cover.
Rotary knobs
Do not remove.
Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth.
* Optional (available for some appliances, depending on the
appliance model)
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments