Bosch HKK99V850M Instruction Manual download pdf (Page 8)

Electrical connection

The appliance must only be connected to the power supply by

a licensed professional. The appliance must be installed in

accordance with the most recent IEE guidelines (Institute of

Electrical Engineers). The appliance may be damaged if

incorrectly connected.

Make sure the voltage of the power supply corresponds to the

specified value on the rating plate.

Ensure that the power supply is properly earthed and that the

fuse and the wiring and piping system in the building is

sufficiently dimensioned for the electrical power of the

appliance.

Observe the following points when routing the service cable:

■ Do not pinch or squeeze the cable.

■ Keep the cable away from sharp edges.

■ Do not bring the cable into contact with parts that can reach

temperatures of more than 50 °C above room temperature.

: Danger of death!

There is a risk of electric shock if you touch live components.

■ Always make sure your hands are dry when you touch or

hold the mains plug.

■ Only pull out the mains cable by taking hold of the plug and

removing the plug; never pull it out by the mains cable itself,

as this could damage it.

■ Never unplug the mains plug when the appliance is in

operation.

Please note the following information and ensure that:

Notes

■ The mains plug fits the socket.

■ The cable cross section is adequate.

■ The earthing system is properly installed.

■ The mains cable is only replaced by a qualified electrician (if

this is necessary).Spare mains cables can be ordered from

our after-sales service.

■ No power strips/multi-way connectors or extension cables

are used.

■ If using a residual current device, only use one that bears the

mark

The presence of this mark is the only way to be sure that it

fulfils all the applicable regulations.

■ The mains plug can be accessed at all times.

■ The mains cable is not kinked, crushed, modified or severed.

■ The mains cable does not come into contact with heat

sources.

The electric wires have the following colours.

Connecting the appliance

The appliance belongs to protection class 1 and must only be

operated with a protective earth connection.

The appliance must be disconnected from the power supply

whenever installation work is being carried out.

The appliance must only be connected using the power cable

provided.

When the appliance is installed, protection must be provided

against accidental contact in the future.

The appliance must only be connected to the mains electricity

supply by a specialist. This specialist must be aware of and

comply with the requirements stipulated by the local energy

supply company.

Any damage caused by the appliance being incorrectly

connected is not covered by the guarantee.

Caution!

If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons in

order to avoid a hazard.

Power cable without an earthed safety plug

The wiring must have an isolating switch with a contact gap of

at least 3 mm. Identify the phase and neutral wires ("third wire")

in the mains socket. The appliance may be damaged if it is not

connected correctly.

The mains power cable must be connected as shown in the

connection diagram.

The power cable must be H05 VV-F or H05 V2V2-F or higher.

Note: The appliance comes delivered configured for

connection to 3 phases. The power circuit must be configured

to 20 A.

Connecting the appliance to 3 phases

For connection to 380-415 V with 3 phases + neutral (3N~),

the phase connection must be changed.

1. Use a 5 x 2,5 mm

cable.

2. Configure the circuit to 20 A per phase.

Connection diagram

Explanatory notes

Green and yellow

Earth

Blue Neutral wire

Brown, black and grey Phase

/

/

/ 









+99)*PP1a

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Comments to this Manuals

No comments

Bosch HKK99V850M Instruction Manual Page 8

Comments to this Manuals

Related products and manuals for Ovens Bosch HKK99V850M