Bosch INTEGRUS Service Manual download pdf (Page 68)

68 en | Operation Integrus

IOM-INT | V1.1 | 2010.12 Installation and Operation manual Bosch Security Systems B.V.

9 Operation

9.1 Integrus transmitter

9.1.1 Start-up

When the transmitter is switched on, the display shows the Transmitter Status screen, which

is the first item of the Main menu (see section 7.2.1 ). The display also goes to this screen

after 3 minutes of inactivity. In case the system detects a fault, the display shows a flashing

fault message (see section 9.1.3 ).

9.1.2 View transmitter status

The first screen of the Main menu gives information about the present status of the

transmitter. The screens shows the name of the transmitter (1st line) and the present

transmission mode (2nd line). See examples below. See section 7.2.2 to change the

transmission mode.

9.1.3 View fault status

The fault status of the radiators can be seen in the second screen of the Main menu:

Transmitter is transmitting 10

channels from DCN.

Transmitter is transmitting the

Aux inputs on all channels.

Transmitter is in Standby

mode (not transmitting).

Menu Item Option (read only) Description

Transmitter Status Name The first line shows the user defined name of

the transmitter (see section 7.2.13 ).

Mode: The second line shows the actual transmission

mode:

- nn Channels Audio signals are distributed on nn channels.

- Aux to All The signal on the Aux. inputs is distributed on

all channels.

- nn Ch. Test The test signals are distributed on nn

channels.

- Slave The transmitter operates in slave-mode: the

radiator signal on the slave input is looped-

through to all radiator outputs.

- Standby The transmitter is in stand by mode.

- Emergency Call An emergency signal from the Aux. inputs is

distributed to all channels.

DCN The text ‘DCN’ is shown at the right side of

the second line when a DCN or a DCN Next

Generation system is connected to the

transmitter.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 89 90

No comments

Bosch INTEGRUS Service Manual Page 68