Bosch F220 User Manual download pdf (Page 13)

F220 Series Detectors with F220-B6RS Bases Install the Bases | en 13

Bosch Security Systems, Inc. Installation Manual F.01U.029.847 | -01 | 2007.02

3.4.2 Local Configurations

In these configurations, the sounders are controlled and

powered from the control panel’s power circuit (refer to

Figure 3.2, Items 1 and 2 on page 14). The initiating device

circuit (IDC) wires connect to Terminals 1 and 2 (refer to

Figure 3.2, Items 3 and 4 on page 14). The DIP Switches are set

for one of the following patterns: Temporal (Code 3), March

Time, or Continuous Tone (refer to Table 3.2 on page 15).

– Local Configuration: Each sounder is individually set and

activated (refer to Table 3.2 on page 15).

– Interconnection Configuration: Up to five detectors can be

interconnected by a common wire (refer to Figure 3.2, Item

4 on page 14, Table 3.2 on page 15, and Figure 3.3 on

page 17). All sounders within the group activate together.

Set all units for the same output pattern (Temporal Code

3, March Time, or Continuous Tone). All interconnected

detectors are synchronized with and sound the pattern of

the originating detector.

F01U029847-01.book Page 13 Thursday, March 1, 2007 9:27 AM

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

No comments

Bosch F220 User Manual Page 13