Bosch F220 User Manual download pdf (Page 8)

8 en | Install the Bases F220 Series Detectors with F220-B6RS Bases

F.01U.029.847 | -01 | 2007.02 Installation Manual Bosch Security Systems, Inc.

2.3.2 Base Specifications

2.3.3 Detector Specifications

2.4 Electrical Supervision

When the F220-B6RS Bases are wired according to the

instructions in this document, the control panel initiates a

trouble signal when a detector is removed from its base,

providing tamper protection. An EOL power supervision

module, such as a D275 or an F220-B6E Power Supervision

Base and an EOL resistor as specified by the control panel

manufacturer, supervises power.

3 Install the Bases

3.1 Mount the Bases

With the exception of the F220-B6E base, all four-wire bases

can be used in any combination within a loop. One F220-B6E

Alarm Current (only base current, detector current excluded)

F220-B6RS (with

steady sounder and

relay):

45 mA at 24 VDC

50 mA maximum at 30 VDC

F220-B6RS (with

separately powered

sounder only):

30 mA at 24 VDC

35 mA maximum at 30 VDC

NAC Current 30 mA at 24 VDC

Standby Current 10 mA maximum at 30 VDC

Voltage 10.0 VDC to 30.0 VDC

Table 2.4 F220-B6RS Detector Base Specifications

Current

Alarm: 35 mA maximum at 32 VDC

Standby: 0.12 mA maximum

Startup: 0.12 mA maximum

Powerup Time 22 second maximum

Rate of Rise

F220-135: 15°F/min (9°C/min) or greater

Table 2.5 F220 Series Detector Heads Specifications

F01U029847-01.book Page 8 Thursday, March 1, 2007 9:27 AM

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

No comments

Bosch F220 User Manual Page 8