Bosch ITS-DX4020-G Specifications download pdf (Page 13)

GPRS/GSM IP Communicator Installation | en 13

Bosch Security Systems, Inc. Installation and Operation Guide F01U133268 | 03 | 2010.05

3.3 Mount the ITS-DX4020-G in the Control Panel Enclosure

Refer to Figure 3.2, Page 13.

1. Mount the ITS-DX4020-G into the control panel's enclosure using the supplied mounting

screws.

Use any of the standard three-hole mounting patterns on the control panel’s enclosure. If

necessary, remove the three knockouts.If necessary, use the D137 Mounting Bracket (not

supplied) to mount the ITS-DX4020-G on the control panel enclosure.

2. Place the magnetic antenna in the vertical position on the top of the control panel

enclosure or other metal surface.

3. Connect the antenna cable to the ITS-DX4020-G.

Figure 3.2 Sample Mounting Location in Control Panel Enclosure

NOTICE!

The antenna must be placed on a magnetic metal surface for proper operation.

For best performance, ensure that the surface area extends 10 cm (4 in.) or more in all

directions around the antenna.

Callout Description

1 Sample mounting location and ITS-DX4020-G mounted at that location with

supplied mounting screws

2 Magnetic antenna (mount on top of the enclosure or other metallic surface);

route the antenna cable through the enclosure knockout

3 ANTENNA connector on ITS-DX4020-G

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 51 52

No comments

Bosch ITS-DX4020-G Specifications Page 13