Bosch ITS-DX4020-G Specifications download pdf (Page 19)

GPRS/GSM IP Communicator Configuration | en 19

Bosch Security Systems, Inc. Installation and Operation Guide F01U133268 | 03 | 2010.05

4.1.2 Compose the Configuration SMS

Use the appropriate SMS template for the selected mode of operation, and compose the

configuration SMS message on your mobile phone. SMS can contain only 160 characters.

Refer to Section Multiple SMS Messages (for Messages Longer than 160 Characters), page 20 for

instructions for sending a multiple SMS configuration.

The templates below contain only the essential configuration IDs. For additional configuration

IDs, refer to Table 4.9, Page 30.

Refer to Table 4.1, Page 18 for information about the modes allowed for your control panel.

IP over GPRS Mode

Table 4.2 IP over GPRS Mode and Dual Wireless Mode SMS Configuration

NOTICE!

Separate each ID or value pair with a line feed (<LF>), a carriage return (<CR> or

< ENTER>), or a semi-colon <;>. Because of phone and carrier differences, Bosch

recommends using semi-colons to create and send SMS messages (for example,

%1;1=4020G;10=Airnet1;14=88;17=2;!). To allow spanning of configuration across multiple

messages, each SMS starts with the sequence number followed by the command line

separator.

Any of these characters is acceptable to separate command lines. Refer to your cellular

phone’s documentation for available characters.

ID Description Sample SMS

SMS sequence number 1

1= Current password (4 to 15 characters); default = 4020G

10= GPRS access point name (APN); 1 to 63 characters

14= – 13 or 14 (DS7400XiV4)

– 88 (GV2 Series, GV3 Series)

– 92 (GV3 Series)

– 134 (DS7200V2 Series, Easy Series)

– 250 (FPD-7024)

17= Communication path:

– 1 = Both (default)

–2 = IP over GPRS

– 3 = PSTN (Contact ID) over GSM

! End of configuration

The % symbol starts the SMS configuration message content. Any data before the % symbol is discarded.

The % symbol is followed directly by the sequence number of the message (1 to 3).

1=4020G

10=basic.m2m

14=88

17=2

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 51 52

No comments

Bosch ITS-DX4020-G Specifications Page 19