Bosch AutoDome Installation Manual Page 71

  • Download
  • Add to my manuals
  • Print
  • Page
    / 84
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 70
AutoDome Modular Camera System Glossary | en 61
Bosch Security Systems, Inc. Installation Manual F01U010921 | 1.0 | 2006.10
6Glossary
A
Address
Each AutoDome has a numerical address in the control system in which it is located. This
allows the appropriate dome to be operated. The address may be set locally using the Bilinx
Configuration Tool for Imaging Devices (CTFID) or remotely using the Fast Address function
(see Fast Address).
AAC (Advanced Alarm Control)
AutoDome’s flexible and sophisticated alarm management subsystem that allows “rules” to be
created that define which input(s) activate one or more outputs (see Alarm Rule). In its most
basic form, a rule could define which input(s) should activate which output(s). In a more
complex form, a rule can be programmed to take a specific keyboard command (pre-existing
or not) and perform a dome function, or any combination of the above.
Advanced Diagnostics
Bosch’s combination of built-in On Screen Displays (OSD) and status LEDs that are used to
check critical camera parameters such as internal temperature, input voltage levels, and
network connectivity. This allows a technician to quickly determine the source of problems
and ensure that the dome is functioning within correct operating limits.
Alarm Rule
AutoDome’s alarm management subsystem that uses “if this, do that” rules to perform
specific actions when an event occurs.
Aperture
The size of the opening in the iris. This controls the amount of light that reaches the CCD
Sensor. The larger the F-Stop numbers, the less light reaches the sensor.
AutoBlack
A technique of boosting the video signal level to produce a full amplitude video signal even
when the scene contrast is less than full range (e.g. glare, fog, mist, etc.). The darkest part of
the signal is set to black and the lightest part to white, thus increasing the contrast.
AutoDome
Fully integrated, high speed, pan/tilt/zoom camera built into a protective dome housing
allowing full and continuous 360° coverage of the scene.
Auto Focus
The lens continuously adjusts to the correct focus automatically for the sharpest picture.
AutoIris
The lens iris opening is automatically adjusted to allow the correct illumination of the camera
sensor.
Automatic Gain Control
The electronics that regulate the gain or amplification of the video signal.
AutoPan
The camera pans continuously between right and left limit settings.
AutoPivot
As the camera tilts through the vertical position, the camera is rotated to maintain the correct
orientation of the image.
Page view 70
1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 83 84

Comments to this Manuals

No comments