Bosch DWI37JM60 Installation Manual download pdf (Page 11)

Installation en

5Installation

Installation

Preparing for installation

Caution!

Ensure that there are no electrical wires, gas pipes or

water pipes in the area where holes are to be drilled.

1. Determine where the extractor hood should be

positioned and lightly mark where the lower edge of

the appliance should be on the wall. Determine

where the middle should be based on the hob.

Note: We recommend fitting the extractor hood such

that the lower edge of the appliance is in line with

the lower edges of the adjacent wall-hung cabinets.

Make sure that the specified safety clearances from

the hob are complied with.

2. Place the template against the line drawn on the

wall. Mark where the screws should be inserted.

3. Drill three 8 mm diameter holes to a depth of 80 mm

for fastening the appliance and press in the wall

plugs flush with the wall.

Preparing the appliance

1. Remove the activated charcoal filter from the film.

2. Open the cover on the top of the appliance and

and then close the cover.

[

PP

PP

PP

PP

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

No comments

Bosch DWI37JM60 Installation Manual Page 11