Bosch DWI37JM60 Installation Manual download pdf (Page 12)

en Installation

Installation

1. Screw in the mounting supports for the extractor

hood until they are hand-tight, use a spirit level to

level the appliance and then screw the mounting

supports in fully.

2. Screw in the threaded bolt, leaving it protruding out

of the wall by 5 - 9 mm.

Hanging the appliance

1. If there is any protective film on the appliance, first

remove the protective film from the back and,

following installation, remove the rest of the film.

2. Remove the metal grease filter before hanging the

appliance.

3. Hang the appliance on the wall.

4. Firmly tighten the knurled nuts.

5. Reinsert the metal grease filter and connect the

power supply.

NJONN

NBYNN

1 2 ... 7 8 9 10 11 12 13 14 15 16

No comments

Bosch DWI37JM60 Installation Manual Page 12