Bosch 430 Operations Instructions Page 21
- Page / 92
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Video Recorder 430/451 Series Hardware setup | en 21
Bosch Security Systems Installation and Operation manual F.01U.168.054 | v2.0 | 2012.05
4 Hardware setup
This chapter contains detailed information about the hardware installation and connection of
external equipment to the unit. The connector types and their pin signals are described. Most
of the connectors are located at the rear panel of the unit. For convenience, one USB port is
located on the front of the unit to connect a mouse or memory device.
All the input/output ports are Safety Extra Low Voltage (SELV) circuits. SELV circuits should
only be connected to other SELV circuits.
4.1 Camera connections
Connect cameras to the VIDEO IN connectors on the back of the unit using 75 ohm video
coaxial cables with BNC connectors. Optionally, this signal can be looped through to other
equipment via the corresponding VIDEO OUT connector. The camera input connectors are
auto-terminating. There is no need to add a terminator to the output connector if no
additional equipment is connected.
If the camera signal is looped through to additional equipment, make sure that the end of the
video connection is terminated with 75 ohm termination.
The DVR automatically configures itself as a PAL or NTSC unit. The unit determines the
standard by detecting the signal format of the VIDEO IN 1 during startup. The unit can also be
manually set to PAL or NTSC in the ‘Camera menu’ under ‘Video format’.
Specifications
Input signal: Composite video 1 Vpp, 75 ohm
Color standard: PAL/NTSC, auto-detect
Gain control: Automatic gain control for each video input
Connector type: BNC looped-through, automatic termination
Figure 4.1 Four video inputs with loop-through outputs
4.2 Audio connections
The DVR supports up to 4 audio inputs and 1 audio output. Connect using audio cable with
RCA (CINCH) compatible connectors.
– 4 audio inputs are provided on the Advanced Recorder
– 1 audio input is provided on the Basic Recorder
Specifications
Input signal: Mono RCA (CINCH), 1 Vpp, 10k ohm
Output signal: Mono RCA (CINCH), 1 Vpp, 10k ohm
Figure 4.2 Audio output and input connectors for the Advanced Recorder
- Video Recorder 430/451 Series 1
- Table of Contents 3
- 1.1 Safety precautions 7
- 1.3 Important Notices 9
- 1.4 FCC and UL 11
- 1.5 Bosch notices 12
- 2 Introduction 13
- 2.2 Unpacking 14
- 2.3 Installation environment 15
- 2.4 Associated equipment 15
- 2.5 Warranty 15
- 3 Quick install 16
- 3.2 First-time use 17
- 3.3 Quick install menu 18
- 3.3.2 Continuous Recording 19
- 3.3.3 Network 20
- 4 Hardware setup 21
- 4.3 Monitor connections 22
- 4.5 Ethernet connection 24
- 4.6 RS485 port 24
- 4.7 USB connectors 25
- 4.9 Power supply 26
- 4.10 Maintenance 26
- 5 Operating instructions 27
- 5.1.1 Keys 28
- 5.1.2 Indicators 29
- 5.2 Mouse Controls 30
- 5.3 Remote control 31
- QuadSingle 32
- 5.5 Live and playback 34
- 5.6.2 Access using the mouse 35
- 5.6.3 Main menu 36
- 5.7 Search 37
- 5.7.1 Date/time search 38
- 5.7.2 Event search 39
- 5.7.3 Smart search 40
- 5.8 Export 41
- 5.9 System information 42
- 5.10 Log 43
- 5.11 Triggers and alarms 44
- 5.11.2 Motion events 45
- 5.11.3 Video loss alarm 45
- 5.11.4 Multiple alarms 45
- 6 Configuration menu 46
- 6.1 Camera 48
- 6.1.2 Video adjustment 49
- 6.1.3 PTZ 50
- 6.1.4 Continuous Recording 51
- 6.1.5 Input Recording 52
- 6.1.6 Motion Recording 53
- 6.1.7 Network Live Streaming 53
- 6.1.8 Video format 54
- 6.2 Schedule 55
- 6.3 Display 56
- 6.4 Event 57
- 6.4.2 Motion 58
- 6.4.3 Alarm acknowledge 59
- 6.4.4 System menu 60
- 6.5 Network 61
- 6.5.4 DDNS 63
- 6.5.5 Notification 63
- 6.5.6 Mail 64
- 6.6 System 65
- 6.6.4 Users 66
- 6.6.5 Configuration 67
- 6.6.6 Hard Disk 68
- 6.6.7 System 69
- 7 Web Client Software 70
- 7.2 How to log on 71
- 7.3.1 Live mode 72
- 7.3.2 PTZ camera control 72
- 7.3.3 Camera views 74
- 7.3.4 Playback mode 74
- 7.3.5 Export mode 75
- 7.3.6 Configuration mode 76
- 8 Archive Player 77
- 8.3 Camera Views 78
- 8.4 Viewing Images 79
- 8.6 Find image 80
- 8.7 Video slider bar 80
- 8.8 Checking authenticity 80
- 8.9 Exit button 80
- 9 Menu default values 81
- 10 Technical specifications 85
- 10.1.1 Mechanical 86
- 10.1.2 Environmental 86
- 10.2 DVD compatibility 87
- 10.3 USB memory sticks 87
- A Appendix 88
- Bosch Security Systems 92
Related products and manuals for Digital Video Recorders (DVR) Bosch 430
(158 pages)
(21 pages)
(26 pages)
(12 pages)© 2020, manymanuals.com. All rights reserved. | 6.385 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals