Bosch GAS 25 L SFC Operations Instructions Page 12

  • Download
  • Add to my manuals
  • Print
  • Page
    / 154
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 11
12 | English
1 609 92A 0X9 | (28.7.14) Bosch Power Tools
Do not use the vacuum cleaner as a seat. The vacuum
cleaner could become damaged.
Use the mains cable and the vacuum hose carefully.
Other persons could be harmed.
Do not clean the vacuum cleaner with a water jet point-
ed directly at it. The penetration of water into the vacuum
cleaner lid increases the risk of an electric shock.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Symbols
The following symbols could have a meaning for the use of
your vacuum cleaner. Please take note of the symbols and
their meaning. The correct interpretation of the symbols will
help you to use the vacuum cleaner in a better and safer man-
ner.
Product Description and Specifica-
tions
While reading the operating instructions, unfold the graphics
page for the vacuum cleaner and leave it open.
Intended Use
The vacuum cleaner is intended for vacuuming and extraction
of materials that are not hazardous to one’s health and for
non-flammable liquids. It is suitable for the increased de-
mands of industrial usage, as required in trades, industry and
workshops.
According to IEC/EN 60335-2-69, vacuum cleaners of dust
category L may only be used for vacuuming and extraction of
hazardous dusts with an exposition limit value > 1 mg/m
3
.
Use the vacuum cleaner only when you fully understand and
can perform all functions without limitation, or have received
appropriate instructions.
Product Features
The numbering of the product features refers to the illustra-
tion of the vacuum cleaner on the graphics page.
1 Cable holder
2 Carrying handle
3 Vacuum lid
4 Mode selector switch
5 Socket for power tool
6 Lock
7 Hose connection piece
8 Vacuum hose
9 Container
10 Latch of the vacuum cover
11 Dust bag
12 Folded filter
13 Motor protection filter
14 Level sensors
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
Symbols and their meaning
Read all safety warn-
ings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Vacuum cleaners of dust category L accord-
ing to IEC/EN 60335-2-69 for dry vacuum-
ing of materials with an exposition limit val-
ue > 1 mg/m
3
that are hazardous to one’s
health.
The vacuum cleaner
contains materials
that are hazardous to one’s health. Have
the emptying and maintenance, incl. the
disposal of dust-collection containers,
carried out only by specialists. Appropri-
ate protective equipment is required. Do
not operate the vacuum cleaner without
the complete filter system. Otherwise
there is danger to your own health.
CAUTION
WARNING
Fold up the vacuum lid 3 and hold it. Grasp
the folded filter 12 by the fins, pull up and
remove.
Symbols and their meaning
OBJ_BUCH-464-007.book Page 12 Monday, July 28, 2014 1:29 PM
Page view 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 153 154

Comments to this Manuals

No comments