Bosch NDN-733 FW5.6 User Manual Page 55
- Page / 111
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Camera Browser Interface Encoder Settings | en 61
Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01
9.1.3 Profile name
If required, enter a new name for the profile.
9.1.4 Target bit rate
To optimize use of the bandwidth in the network, limit the data
rate for the camera. The target data rate should be set
according to the desired picture quality for typical scenes with
no excessive motion.
For complex images or frequent changes of image content due
to frequent movements, this limit can temporarily be exceeded
up to the value entered in the Maximum bit rate field.
9.1.5 Maximum bit rate
This maximum data rate is not exceeded under any
circumstances. Depending on the video quality settings for the
I-frames and P-frames, this can result in individual images being
skipped.
The value entered here must be at least 10% higher than the
value entered in the Target bit rate field. If the value entered
here is too low, it is automatically adjusted.
9.1.6 Encoding interval
The Encoding interval slider determines the interval at which
images are encoded and transmitted. This can be particularly
advantageous with low bandwidths. The image rate in ips
(images per second) is displayed next to the slider.
9.1.7 Standard definition video resolution
Select the desired resolution for the standard definition video
image.
Note:
These resolutions are not used by a HD stream.
9.1.8 Expert Settings
If necessary, use the expert settings to adapt the I-frame quality
and the P-frame quality to specific requirements. The setting is
based on the H.264 quantization parameter (QP).
- Camera Browser Interface 1
- Table of Contents 3
- 1 Browser connection 11
- 1.3 Protected network 12
- 2 System Overview 13
- 3 Operation via the browser 14
- 3.1.2 Status icons 15
- 3.1.4 View Control ROI 17
- 3.1.6 System Log / Event Log 19
- 3.1.7 Saving snapshots 19
- 3.1.10 Audio communication 20
- 3.1.11 Processor load 20
- 3.2 Playback page 21
- 3.2.2 Exporting tracks 22
- 3.2.3 Searching for tracks 22
- 3.2.4 Controlling playback 23
- 4 Settings Overview 25
- 4.2 Settings 26
- 5Basic Mode 27
- 5.2 Date/Time 29
- 5.3 Network 30
- 5.4 Encoder 31
- 5.5 Audio 31
- 5.6 Recording 31
- 5.7 System Overview 31
- 6 Advanced General Settings 32
- 6.2 Password 33
- 6.3 Date/Time 34
- 6.3.5 Time server IP address 35
- 6.3.6 Time server type 35
- 6.4 Display Stamping 36
- 6.4.5 Alarm message 37
- 6.4.6 Video watermarking 37
- 7 Web Interface 38
- 7.1.6 Show overlay icons 39
- 7.1.7 Select video player 39
- 7.2 LIVEPAGE Functions 40
- 7.2.7 Allow snapshots 41
- 7.2.8 Allow local recording 41
- 7.2.9 I-frames-only stream 41
- 7.2.10 Show auto tracker 41
- 7.3 Logging 42
- 8 Camera 43
- 8.2 Lens Wizard 44
- 8.3 Mode menu 45
- 8.4 Color 47
- 8.5.1 Exposure/frame rate 48
- 8.5.2 Day/night 49
- 8.6 Enhance 50
- 8.7 Encoder Settings 51
- 8.8 Privacy Masks 52
- 8.9 Audio 52
- 8.10 Pixel Counter 52
- 9 Encoder Settings 53
- 9.1 Encoder Profile 54
- 9.1.9 Default 57
- 9.2 Encoder Streams 58
- 9.2.2 JPEG stream 59
- 9.3 Encoder Regions 60
- 10 Recording 61
- 10.1 Storage Management 62
- 10.2 Recording Profiles 66
- 10.2.2 Standard recording 67
- 10.3 Retention Time 68
- 10.4 Recording Scheduler 69
- 10.4.3 Profile names 70
- 10.4.4 Activate recording 70
- 10.4.5 Recording status 70
- 10.5 Recording Status 71
- 11 Alarm 72
- 11.1.5 Video transmission 73
- 11.1.6 Stream 73
- 11.1.7 Remote port 73
- 11.1.8 Video output 73
- 11.1.9 Decoder 73
- 11.1.10 SSL encryption 74
- 11.1.11 Auto-connect 74
- 11.1.12 Audio 74
- 11.3 Audio Alarm 76
- 11.4 Alarm E-Mail 77
- 11.4.8 Destination address 78
- 11.4.9 Sender name 78
- 11.4.10 Test e-mail 78
- 11.5 Alarm Task Editor 79
- 12 Setting up VCA 80
- 12.2 VCA - Profiles 81
- 12.2.3 Motion detector 82
- 12.2.4 Tamper detection 83
- 12.3 VCA - Scheduled 87
- 12.4 VCA - Event triggered 89
- 13 Interfaces 90
- 13.3 COM1 91
- 14 Network 92
- 14.1.3 IP V6 address 93
- 14.1.4 DNS server address 93
- 14.1.5 Video transmission 93
- 14.1.6 TCP rate control 93
- 14.1.7 HTTP browser port 93
- 14.1.8 HTTPS browser port 94
- 14.1.9 RCP+ port 1756 94
- 14.1.10 Telnet support 94
- 14.1.11 Interface mode ETH 94
- 14.1.12 Network MSS [Byte] 94
- 14.1.21 Notification mail 96
- 14.1.22 Status 96
- 14.2 Advanced 97
- 14.2.5 RTSP port 98
- 14.2.6 UPnP 98
- 14.2.7 TCP metadata input 98
- 14.2.8 Quality of service 98
- 14.2.9 Cloud-based services 99
- 14.3 Multicast 100
- 14.3.3 Port 101
- 14.3.4 Streaming 101
- 14.3.5 Multicast packet TTL 101
- 14.4 Image Posting 102
- 14.4.2 Face detection 103
- 14.5 Accounts 104
- 14.7 Encryption 105
- 14.6 IP V4 filter 105
- 15 Service 106
- 15.1.3 Configuration 107
- 15.1.4 SSL certificate 107
- 15.2 Licenses 108
- 15.3 System Overview 108
- Bosch Security Systems 111
Related products and manuals for Security access control systems Bosch NDN-733 FW5.6
(98 pages)
(12 pages)© 2020, manymanuals.com. All rights reserved. | 1.299 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals