Bosch GWS 8-125 C (CE) Operations Instructions download pdf (Page 6)

English | 7

Bosch Power Tools 1 609 929 L33 | (24.7.08)

g) If devices are provided for the connection

of dust extraction and collection facili-

ties, ensure these are connected and

properly used. Use of dust collection can

reduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the cor-

rect power tool for your application. The

correct power tool will do the job better

and safer at the rate for which it was de-

signed.

b) Do not use the power tool if the switch

does not turn it on and off. Any power tool

that cannot be controlled with the switch

is dangerous and must be repaired.

c) Disconnect the plug from the power

source and/or the battery pack from the

power tool before making any adjust-

ments, changing accessories, or storing

power tools. Such preventive safety meas-

ures reduce the risk of starting the power

tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfa-

miliar with the power tool or these in-

structions to operate the power tool.

Power tools are dangerous in the hands of

untrained users.

e) Maintain power tools. Check for misalign-

ment or binding of moving parts, break-

age of parts and any other condition that

may affect the power tool’s operation. If

damaged, have the power tool repaired

before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean. Prop-

erly maintained cutting tools with sharp

cutting edges are less likely to bind and are

easier to control.

g) Use the power tool, accessories and tool

bits etc. in accordance with these instruc-

tions, taking into account the working

conditions and the work to be performed.

Use of the power tool for operations differ-

ent from those intended could result in a

hazardous situation.

5) Service

a) Have your power tool serviced by a quali-

fied repair person using only identical re-

placement parts. This will ensure that the

safety of the power tool is maintained.

Machine-specific

Safety Warnings

Safety Warnings common for Grinding,

Sanding, Wire Brushing or Abrasive Cut-

ting Off Operations

f This power tool is intended to function as a

grinder, sander, wire brush or cut-off tool.

Read all safety warnings, instructions, illus-

trations and specifications provided with

this power tool. Failure to follow all instruc-

tions listed below may result in electric shock,

fire and/or serious injury.

f This power tool is not recommended for pol-

ishing. Operations for which the power tool

was not designed may create a hazard and

cause personal injury.

f Do not use accessories which are not specif-

ically designed and recommended by the

tool manufacturer. Just because the accesso-

ry can be attached to your power tool, it does

not assure safe operation.

f The rated speed of the accessory must be at

least equal to the maximum speed marked

on the power tool. Accessories running faster

than their rated speed can break and fly apart.

f The outside diameter and the thickness of

your accessory must be within the capacity

rating of your power tool. Incorrectly sized

accessories cannot be adequately guarded or

controlled.

f The arbor size of wheels, flanges, backing

pads or any other accessory must properly

fit the spindle of the power tool. Accessories

with arbor holes that do not match the mount-

ing hardware of the power tool will run out of

balance, vibrate excessively and may cause

loss of control.

OBJ_DOKU-12526-003.fm Page 7 Thursday, July 24, 2008 1:38 PM

1 2 3 4 5 6 7 8 9 10 11 ... 123 124

Comments to this Manuals

No comments

Bosch GWS 8-125 C (CE) Operations Instructions Page 6

Comments to this Manuals

Related products and manuals for Straight grinders Bosch GWS 8-125 C (CE)