Bosch WAU28460IN Installation Manual download pdf (Page 17)

Positioning and connecting en

17

Tip: Connect also an external water

filter (depending on the model)

between water supply hose and tap.

The filter filters dirt particles out of the

water.

Water filter must be cleaned regularly

to remove contaminants. This will

prevent blockages. See also ~

separate installation and cleaning

instruction for water filter.

2. Open the water tap carefully,

checking the leak tightness of the

connection points. The screw

connection is under mains water

pressure.

Water outlet

Caution!

Water damage

If the drain hose slips out of the wash

basin or the connection point during

draining due to high water pressure, any

escaping water may cause water

damage.

Secure the drain hose so that it cannot

slip out.

Note: Do not kink the water drain hose

or put strain on it lengthways.

You can lay the water drain hose as

follows:

■ Outlet in a sink

:Warning

Risk of scalding!

When you are washing at high

temperatures, there is a risk of

scalding if you come into contact

with hot water e.g. if hot water is

being drained into a wash basin.

Do not reach into the hot water.

Caution!

Damage to the appliance/fabrics

If the end of the drain hose is

immersed in the drained water, water

may be sucked back into the

appliance and may damage the

appliance/fabrics.

Make sure that:

– The plug does not block drainage

from the sink.

– The end of the drain hose is not

immersed in the drained water.

– The water drains away quickly

enough.

■ Drainage into a siphon

The connection point must be

secured using a hose clamp with a

diameter of 24-40 mm (available

from specialist dealers).

■ Outlet into a plastic pipe with

rubber bushing or into a drainage

pit

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 47 48

Comments to this Manuals

No comments