Bosch D6100IPv6 Installation Guide download pdf (Page 12)

Conettix D6600/D6100IPv6 | Program Entry Guide | 2.0 CPU Configuration

Bosch Security Systems, Inc. | 11/12 | 4998122702-07

Refer to Input and Output Ports in the

D6600/D6100IPv6 Operation and Installation Guide

(P/N: 4998122704).

2.2.29 CPU Programmable Input 2

Default: 0

Selections: 0 to 2

0 The UPS AC Lost or the Low Battery signal is

not monitored.

1 Monitoring the UPS AC Lost.

2 Monitoring the UPS Low Battery.

The D6600/D6100IPv6 is connected to an

uninterruptible power supply (UPS), and monitors the

AC Lost signal and the Low Battery signal supplied by

the UPS.

Refer to Input and Output Ports in the

D6600/D6100IPv6 Operation and Installation Guide

(P/N: 4998122704).

2.2.30 Receiver Number

Default: 01

Selections: 01 or 99

Enter the Receiver/Gateway Number.

2.2.31 Line Card Refresh

Default: 6

Selections: 0 to 20

Does not refresh regardless of the number

of No Data Received Reports.

1 to 6 After six consecutive No Data Received

Reports or Data Errors Reports the line

card refreshes.

7 to

The actual number of consecutive No

Data Received Reports or Data Errors

Reports before the line card refreshes.

* Needs at least six consecutive No Data Received Reports or

Data Errors Reports to perform a refresh.

Table 2: No Data Received and Data Error

Codes

D6500 Mode

SIA Mode

No Data

Received

X 63

[NUT04]

Data Error

X 62

[NYN]

Press the [ACKNOWLEDGE] button to clear the

output.

2.2.32 Time Zone

Default: 0

Selections: -12 to +14

Enter the offset from UTC for the Time Zone that the

receiver is located in. For example, -5 for the Eastern

Time Zone in the US.

Time Zone is the offset from Coordinated Universal

Time (UTC) by a whole number of hours.

2.2.33 External Parallel Printer

The D6600/D6100IPv6 needs an external parallel

printer. Refer to the operation and installation guide

for compatible printers. Enable, disable, or use the

parallel printer as a backup in case the computer

automation system fails.

Default: 3

Selections: 1 to 4

Primary: All reports go to this device.

Secondary: Reports go to this device only

after all primary devices fail.

Always On: All reports go to this device

whether or not it is functional.

4 Always Off: Device is disabled. No reports

are sent to this device.

Set this item to 1 to meet the requirements for UL

Burg/Automatic certification if you are not using a computer

automation system and have the parallel printer installed.

Set this item to 3 to meet the requirements for UL

Fire/Burg/Automatic certification if you are using a computer

automation system and have the parallel printer installed.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 48 49

Comments to this Manuals

No comments

Bosch D6100IPv6 Installation Guide Page 12

Comments to this Manuals

Related products and manuals for Car media receivers Bosch D6100IPv6