Bosch D6100IPv6 Installation Guide download pdf (Page 31)

Conettix D6600/D6100IPv6 | Program Entry Guide | 3.0 Line Card Configuration

Bosch Security Systems, Inc. | 11/12 | 4998122702-07

3.1.3.16 Ademco CAPS 4-2 None O/C Report

Default: 0

Selections: 0 or 1

0 Send the unconverted 4-2 messages to the

automation software.

1 Send the CAPS 4-2 Report to the

automation software.

Example: aaaa ddd

where aaaa = 4-2 Account code,

ddd = Three digit decimal number

(16 x Event Code + Zone Code)

An ASCII character A appears between

the account number and the decimal

number on the receiver display.

Example: aaaa A ddd.

3.1.3.17 Ademco 4-2 O/C Report

Default: 0

Selections: 0 or 1

0 A normal 4-2 Report is sent to the

automation PC.

1 Convert the PULSE 4-2 Open/Close

messages (code B0-BF, C0-CF) to the

Ademco High Speed format.

Use this option to convert PULSE 4-2 Open/Close

messages (code B0-BF, C0-CF) to the Ademco High

Speed format.

3.1.3.18 SIA Acknowledge

Default: 0

Selections: 0 or 1

0 Enable both Data and Tonal acknowledge.

1 Enable only Tonal acknowledge.

Use this option to select which kind of SIA

acknowledge is enabled.

3.1.3.19 Support High Speed/ScanCom Formats

Default: 0

Selections: 0 or 1

0 Enable

1 Disable

Use this option to enable or disable High

Speed/ScanCom formats.

3.1.3.20 GSM/VoIP Compensation

Default: 0

Selections: 0 or 1

This option improves DTMF format

communications by analyzing the event message

without timing restrictions to support GSM/VoIP

communication path differences. Current supported

formats are Contact-ID, 4-1 Express and

4-2 Express.

0 Disable GSM/VoIP Compensation

1 Enable GSM/VoIP Compensation

3.1.4 Two-Way Audio

D6600 Two-Way Audio (TWA)

verification is fully supported using the

D6641 Line Card. The D6640 does not

support options 3.1.4.21 Audio Event,

3.1.4.22 Audio Zone, or protocol-specific

audio events used in SIA and Contact

ID.

3.1.4.1 Duration

Default: 0

Selections: 0 to 15

The amount of time the D6600/D6100IPv6 stays on

line when it is in two-way audio operation. The time is

set in one-minute increments. A setting of 0 disables

the two way audio feature.

For RB2000, set this option to 2.

3.1.4.2 Account Digit 0

Default: 0

Selections: 0 or 1

0 Disables account digit

1 Enables account digit

The D6600/D6100IPv6 decodes the first digit of the

account number to determine when to start two way

audio operations. If the first digit of the account

number matches the selection, the two way audio is

activated.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 48 49

Comments to this Manuals

No comments

Bosch D6100IPv6 Installation Guide Page 31

Comments to this Manuals

Related products and manuals for Car media receivers Bosch D6100IPv6