Bosch D6100IPv6 Installation Guide download pdf (Page 43)

Conettix D6600/D6100IPv6 | Program Entry Guide | 6.0 Network Configuration

Bosch Security Systems, Inc. | 11/12 | 4998122702-07

6.3.6 Network Automation Output Format

Default: 0

Selections: 0 to 2

0 Disable network automation output.

1 D6500 Mode automation output.

2 Bosch SIA Mode automation output.

If after selecting an automation output,

you decide to disable automation (select

0), reboot the receiver for proper

operations.

Selection 0 completely disables

automation output when Menu Item

6.3.7 Device is set to 1.

6.3.7 Device

Default: 2

Selections: 1 or 2

1 Use Network Automation.

2 Use COM3 RS-232 automation.

Menu Item 6.3.7 must be set to 1 to use

network automation

6.4 D6200 Network Connection

Connect the D6200 software to the network through

the D6600 COM4 or COM1 port or the D6100IPv6

Ethernet port.

One receiver can communicate with three different

PCs running the D6200 Programmer Software.

6.4.1 IP Address 1

Selections:

[IPv4] xxx.xxx.xxx.xxx

[IPv6]

xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx

This entry is the first IP Address of the computer

running the D6200 software. Set the IP Address to a

unique value to distinguish it from other stations in the

network. This value must match the D6200 software

network settings.

“UP” key”∆” for “.”, and “DOWN” key for

“:”

6.4.2 IP Address 2

Selections:

[IPv4] xxx.xxx.xxx.xxx

[IPv6]

xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx

This entry is the second IP Address of the computer

running the D6200 software. Set the IP Address to a

unique value to distinguish it from other stations in the

network. This value must match the D6200 software

network settings.

“UP” key”∆” for “.”, and “DOWN” key for

“:”

6.4.3 IP Address 3

Selections:

[IPv4] xxx.xxx.xxx.xxx

[IPv6]

xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx

This entry is the third IP Address of the computer

running the D6200 software. Set the IP Address to a

unique value to distinguish it from other stations in

the network. This value must match the D6200

software network settings.

(Important Note)“UP” key”∆” for “.”,

and “DOWN” key for “:”

6.4.4 Reserved

Section 6.4.4 is reserved in Firmware

version 1.32 and later.

Typically, the port numbers 0 to 1023

are reserved in UNIX systems for

specific applications. Use numbers

ranging from 2000 to 30000 to avoid

conflicts.

6.4.5 Network Programming Enable

Default: 1

Selections: 0 or 1

0 Disable network programming.

1 Enable network programming.

Use the D6200 to program the D6600/D6100IPv6

CPU, line card and other network communication

parameters through the network connection.

6.4.6 Login Password

Default: (blank)

Selections: XXXXXXXXXXXXXXXX

This password is a string from 8 to 16 characters.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 49

Comments to this Manuals

No comments

Bosch D6100IPv6 Installation Guide Page 43

Comments to this Manuals

Related products and manuals for Car media receivers Bosch D6100IPv6