Bosch MUM9AV5S00 Instruction Manual download pdf (Page 29)

29

en Preparation

Preparation

 Place the base unit on a smooth, clean

and stable surface.

 Pull the power cord out to the required

length.

 Press the release button and raise

the swivel arm to the stop.

 Place the cover with the filling shaft at

the front on the main drive.

 Insert the bowl. When doing so, use the

recesses on the base unit.

 Turn the bowl anticlockwise until it locks

into place.

The base unit is prepared for further use.

Important: Do not slide the appliance about

on the work surface as this may impair

the functioning of the scales. To move the

appliance, lift it.

Settings

 Press the release button and push the

swivel arm down until it locks into place.

 Plug the mains plug into the mains.

The appliance is switched on.

 “OptiMUM” appears on the display.

Note: If the appliance is not used or

operated within a certain period, the display

will slowly fade and switch to standby

mode. “OptiMUM” will appear once again

when any button is touched.

 Press and hold buttons A and + at the

same time until the configuration menu

is opened.

 Release buttons A and + again.

Selecting setting

 The following settings appear in

sequence each time button A is briefly

pressed:

– LANGUAGE

Language in which the display texts are

displayed.

– SOUND

Volume of the acoustic signals – setting

in 6 levels from off to loud.

– BRIGHTNESS

Brightness of the display – setting in

6 levels from dark to bright.

– UNITS (for models with scales)

Unit of display for the scales – grams (g)

or pounds (lb).

Changing and saving settings

 The current setting is changed using the

button + or -.

 Press and hold buttons A and +

simultaneously until “SETUP SAVED”

briefly appears on the display.

 Release buttons A and + again.

The changed settings are saved.

Example: Setting the language

X see also quick reference guide

 Press and hold buttons A and + at the

same time until the configuration menu

is opened.

 The language selection is shown.

 Release buttons A and + again.

 Press the button + or - repeatedly

until the desired language is displayed.

LANGUAGE

ENGLISH

 Press and hold buttons A and +

simultaneously until “SETUP SAVED”

briefly appears on the display.

SETUP

SAVED

 The language selection is shown on the

display.

 Release buttons A and + again.

The language selection is saved.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 187 188

Comments to this Manuals

No comments