Bosch MUM9AV5S00 Instruction Manual download pdf (Page 33)

33

en Using the scales

– Do not start SensorControl Plus a

second time with ingredients which have

already been processed.

Example: Making beaten egg

white with SensorControl Plus

X Image sequence J

1. Prepare the base unit and insert the

professional stirring whisk.

2. Press the release button and push the

swivel arm down until it locks into place.

3. Plug the mains plug into the mains.

“OptiMUM” appears on the display.

4. Separate the eggs (2-12 eggs).

5. Press button D. “CREAM” appears on

the display.

Note: Models without a scale display

“CREAM >300ml”. Press button D

again. “CREAM >700ml” appears on the

display.

6. Press button D. “EGG WHITE” appears

on the display.

7. Add the egg white to the bowl. “TURN

SWITCH TO M/A” appears on the display.

8. Turn the rotary switch to ü and hold

in this position.

9. After a short while the rotary switch is

automatically fixed in this position and

remains on ü after being released.

10. “SENSOR CONTROL PLUS” appears

on the display. SensorControl Plus

monitors the processing.

11. Once the pre-programmed consistency

has been achieved, an acoustic signal

will sound and processing will stop.

“FINISH” appears on the display.

Note: Setting the acoustic signal

X “Settings” see page 29

12. The rotary switch automatically switches

to y. “OptiMUM” appears on the

display.

13. Disconnect the mains plug.

14. Processing with the “EGG WHITE”

function is ended.

15. Clean all parts immediately after use.

X “Cleaning and maintenance” see

page 35

Using the scales

Depending on the model in question, the

appliance may be equipped with scales.

The following applications are possible:

– Weighing the added ingredients

(either each ingredient individually or all

ingredients together).

– Pre-setting a desired weight and

counting down until sufficient ingredients

have been added (with audible

information signals).

Important:

– The appliance has 4 weight sensors

in the feet. The scales only supply

the correct results if all of the feet are

standing on a solid and level surface.

Do not put any cloths or other items

underneath.

– Do not slide the appliance about on

the work surface as this may impair the

functioning of the scales. To move the

appliance, lift it.

– After switching on or resetting the

scales, they are calibrated for a brief

moment (tare). During this process, do

not touch the appliance or place any

items on top of it (e.g. wooden spoon,

tea towel etc.).

– Ensure that measuring jugs or

packaging are not lying on top of the

appliance (e.g. on the edge of the filling

shaft).

Weighing ingredients

X Image sequence K

1. Prepare the base unit.

2. Plug the mains plug into the mains.

“OptiMUM” appears on the display.

3. Press button C and don’t touch the

appliance again.

Individual dashes appear one after each

other on the display during calibration:

“–––––” (tare).

4. “0g” or “0.00lb” appears on the display

(depending on the setting). The scales

are ready.

5. Add ingredients. The scales display the

weight.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 187 188

Comments to this Manuals

No comments