Bosch MUM9AV5S00 Instruction Manual download pdf (Page 34)

34

en Using accessories

6. Start processing or put out other

ingredients ready for use.

7. Press button C and do not touch

the appliance again. “0g” or “0.00lb”

appears on the display (depending on

the setting). The scales are ready.

8. Add all desired ingredients and weigh

them in this manner.

Process the weighed ingredients. X “Using

without additional functions” see page 30

Note: If button C is pressed while

processing food, “FOR SCALE

STOPMACHINE” appears on the display.

Pre-setting the weight

X Image sequence L

1. Press button C and don’t touch the

appliance again.

Individual dashes appear one after each

other on the display during calibration:

“–––––” (tare).

2.

“0g” or “0lb” appears on the display

(depending on the setting). The scales

are ready.

3. Press button +. “100 g” or “0.2 lb”

appears on the display (depending on

the setting).

4. Set the desired weight using button

+ or - (max. 5000 g).

5. Add ingredients. The quantity still

missing is shown on the display, e.g.

“65g”.

6. From “40g”, a recurring acoustic signal

sounds. The lower the remaining

quantity, the faster the acoustic signal

sounds.

Note: Setting the acoustic signal

X “Settings” see page 29

7. At “0g” (meaning that the pre-set

quantity has been added), the acoustic

signal stops.

8. If the pre-set quantity has been

exceeded, the acoustic signal will sound

continuously. The additional weight is

indicated with a minus symbol. If the

quantity is exceeded by 25 g, “–25g” is

displayed.

Using accessories

Your kitchen machine offers a number

of accessories that significantly extend

its functions. Depending on the model,

certain accessories are already included

in the scope of supply. If an accessory

is not included, it can be purchased

via trade stockists or customer service.

X “Accessories” see page 40

Preparation for accessories

The base unit requires different preparation

depending on the accessory.

 Place the base unit on a smooth, clean

and stable surface.

 Pull the power cord out to the required

length.

 Prepare the base unit as shown

depending on the accessory.

X Fig. M

1. Preparation for tools.

2. Preparation for accessories on black

drive with bevel gear and accessory

used in place of the bowl.

3. Preparation for accessory on red drive,

for example blender or multi-chopper.

4. Preparation for accessory on yellow

drive without outlet opening for food,

e.g. multi-blender or citrus press.

5. Preparation for accessory on yellow

drive with outlet opening for food, e.g.

continuous-feed shredder.

Important:

 Observe yellow, red or black marking on

drive and accessory. X “Colour coding”

see page 26

 Always secure unused drives with

protective drive covers.

 See the separate instructions for the

individual accessory for all further steps.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 187 188

Comments to this Manuals

No comments