Bosch NET 8054UC Operations Instructions download pdf (Page 12)

Bridge element

(NET 8654U0 only)

The Bridge element combines two individual heating elements into one long griddle

zone. This configuration is ideal for griddles and large pans.

Note: Do not use cookware larger than 17" x 10" (432 x 254 mm).

Turning on the Bridge element:

Touch one of the two O symbols for selecting the heating element, then touch o°.

The o°symbol will appear; both heating elements are now selected. ,'_qappears in

both displays. Within the next 10 seconds select the desired heat setting (1-9). The

Bridge element and both individual heating elements are now on.

Changing the heat setting:

Touch one of the two O symbols for selecting the bridge element, and set the new

heat level within the next 10 seconds.

Turning off the Bridge element feature:

Touch one of the two O symbols for selecting the bridge element, and in the setting

area set the value to 0. ,_,'_appears in both displays. The heating elements will turn off

after about 10 seconds, and the residual heat indicator will appear.

Residual heat indicator

l_l

The cooktop has a hot surface indicator for each element. It shows you which

elements are still hot. The hot surface indicator has two levels.

If an ;4 is shown on the display, the element is still hot. You could use it, for example,

to keep a small quantity of food warm or to melt a chocolate coating.

As the element continues to cool, the display changes to ;7.The display goes out

once the element has cooled sufficiently.

The hot surface indicator will automatically come on after a power failure. The

display lights up for approximately 30 minutes.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 103 104

No comments

Bosch NET 8054UC Operations Instructions Page 12