Bosch 3924-24 Operations Instructions download pdf (Page 80)

Indicators, symbols and

meaning

If the indicator lights are “OFF”, the charger is not receiving

power from power supply outlet.

If the red indicator light is “ON”, the battery

pack is too hot or cold for fast-charging. The

charger will switch to trickle charge, until a

suitable temperature is reached, at which time the charger

will switch automatically to fast-charging.

If the red indicator light is “BLINKING”, the

battery pack cannot accept a charge or the

contacts of the charger or battery pack are

contaminated. Clean the contacts of the charger or battery

pack only as directed in these operating instructions or

those supplied with your tool or battery pack.

If the green indicator light is “BLINKING”, the

battery pack is being fast-charged. Fast-

charging will automatically stop when the

battery pack is fully charged.

If the green indicator light is “ON”, the charger

is plugged in but the battery pack is not

inserted, or the battery pack is fully charged

and is being trickle charged.

Charging Battery Pack

(30 Minute Dual Bay-BC230)

Plug charger cord into your standard power outlet. Before

inserting battery pack

1, remove protective cap 2, then insert

battery pack

1 into charger 3 (Fig. 37).

The charger’s green indicator

4 will begin to “BLINK”. This

indicates that the battery is receiving a fast charge. Fast-

charging will automatically stop when the battery pack is fully

charged.

When the indicator light stops “BLINKING” (and becomes a

steady green light) fast charging is complete.

The battery pack may be used even though the light may still

be blinking. The light may require more time to stop blinking

depending on temperature. When you begin the charging

process of the battery pack, a steady red light

5 could also

mean the battery pack is too hot or too cold.

The purpose of the green light is to indicate that the battery

pack is fast-charging. It does not indicate the exact point of full

charge. The light will stop blinking in less time if the battery

pack was not completely discharged.

When charging several batteries in sequence, the charge time

may slightly increase.

When the battery pack is fully charged, unplug the charger

(unless you're charging another battery pack) and slip the

battery pack back into the tool.

To prevent fire or injury when batteries are not in tool or

charger, always place protective cap onto end of battery

pack.

FIG. 37

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 91 92

Comments to this Manuals

No comments

Bosch 3924-24 Operations Instructions Page 80

Comments to this Manuals

Related products and manuals for Mitre saws Bosch 3924-24