Bosch HVA541NS0 Forno da incasso 90 cm User Manual download pdf (Page 21)

How to operate your oven

Pop-out operating controls

The function selector and the temperature selector can be

popped out. Press the operating control in question to pop it in

or out.

Switching on the oven

1. Use the function selector to set the heating function.

2. Use the temperature selector to set the temperature.

The oven begins to heat up.

Switching off the oven

Turn the function selector and temperature selector to the off

position.

Changing settings

The heating function and temperature or grill setting can be

changed at any time using their respective selectors.

Heating up

To heat up the cooking compartment as quickly as possible,

use the "Circulated air" heating function. If the set temperature

has been reached (indicator light has gone out), set the

required heating function.

Operating the electronic clock

In addition to the clock time and remaining time, the following

symbols may appear on the display:

Setting the time on the clock

After the appliance has been connected to the mains or after a

power cut, three zeros and the "A" symbol flash on the display.

1. Press the 0 button until the dot flashes on the display.

2. Set the current time with the "+" and "-" buttons.

After seven seconds, the time that has been set is adopted.

Note: To change the set time, press the "+" and "-" buttons until

the dot flashes on the display. Then set the current time with the

"+" and "-" buttons.

Setting the timer

The timer has no influence on the functions of the oven. The

duration of the timer can be set to between 1 minute and

23 hours and 59 minutes.

1. Press the 0 button until the V symbol flashes on the display

and three zeros are displayed.

2. Set the required cooking time with the "+" and "-" buttons.

An audible signal sounds once the time has elapsed.

Notes

■ To change the remaining time, press the 0 button until the

V symbol flashes on the display. Then change the remaining

time with the "+" and "-" buttons.

■ To cancel the setting, press the 0 button until the symbol

flashes on the display. Then press the "+" and "-" buttons at

the same time.

Switching off the acoustic signal

Press the "

0" button until the V symbol disappears.

After seven minutes, the signal switches off automatically.

Changing the audible signal

Three different audible signals are available.

1. Press the "+" and "-" buttons simultaneously.

2. Press the 0 button.

The current audible signal is shown in the display panel, e.g.

"Tone 1".

3. Press the "-" button to select a different audible signal.

Setting the automatic timer

The electronic clock can be used to switch the oven on or off

automatically.

Automatic switch-off

1. Press the 0 button until the V symbol flashes on the display

and three zeros are displayed.

2. Press the 0 function button again until "dur" and "0.00" flash

alternately on the display panel and the "A" symbol flashes.

3. Set the cooking time with the "+" and "-" buttons.

The cooking time can be set to between 1 minute and

10 hours.

4. Set the required heating function and temperature.

The oven starts and the A symbol and the current clock time

appear on the display panel.

The cooking time has elapsed

An audible signal sounds, the

Û symbol disappears from the

display panel and the A symbol flashes.

1. Switch off the temperature selector and function selector.

2. Press the 0 button until the Û symbol appears.

The oven switches back to manual mode.

Automatic switch-on and switch-off

Baking or roasting starts for the set duration at a later time

which you chose.

1. Press the 0 button until the V symbol flashes on the display

and three zeros are displayed.

2. Press the 0 function button again until "dur" and "0.00" flash

alternately on the display panel and the "A" symbol flashes.

The current time may be 17:30, for example.

3. Set the cooking time (e.g. 1 hour) with the "+" and "-" buttons.

The cooking time can be set to between 1 minute and

10 hours.

4. Press the 0 function button again until "End" and the switch-

off time "18:30" (i.e. the current time plus the set cooking

time) flash alternately on the display panel.

Symbol Meaning

Dot between the displayed hours and minutes.

Flashes when it is possible to set the clock time.

Timer

Displays the operating statuses for the timer.

A Automatic mode

Displays the operating statuses for Automatic

mode.

Operating readiness

If this symbol is displayed, the oven is ready to

use.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 83 84

Comments to this Manuals

No comments

Bosch HVA541NS0 Forno da incasso 90 cm User Manual Page 21

Comments to this Manuals

Related products and manuals for Ovens Bosch HVA541NS0 Forno da incasso 90 cm