Bosch INTEGRUS Service Manual download pdf (Page 36)

36 en | Installation Integrus

IOM-INT | V1.1 | 2010.12 Installation and Operation manual Bosch Security Systems B.V.

Figure 5.13 LBB 3414/00 wall mounting bracket showing dimensions and drilling pattern

The radiator (plus suspension bracket) is attached to the wall bracket by sliding the mounting

bolt over the slot on the wall bracket and then tightening it (see Figure 5.14). A split pin is

then inserted into a small hole in the bolt to stop it from working loose (see inset in

Figure 5.14).

Figure 5.14 Attaching the radiator to the wall mounting bracket

The vertical angle of the radiator can be adjusted between 0 and 90° in steps of 15°. The

horizontal orientation of the radiator can be adjusted by loosening the bolt then turning the

radiator to the required position.

5.4.4 Ceiling mounting

The radiators can be attached to the ceiling using the supplied suspension bracket. This

ensures enough space for a proper air flow around the radiator. Mounting a radiator in the

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 89 90

No comments

Bosch INTEGRUS Service Manual Page 36