Bosch VG5-825-ETEV Specifications download pdf (Page 103)

Samsung

28-5

• If FPS is too low, RTSP connects to camera may timeout and then the NVR will have no video.

The following cameras were found to have this issue:

• For SNV-5010 and SND-7080, the MJPEG video will not display when the user

sets fps to 1 and resolution to less than 1280*720.

• For SND-3002 and SND-5080, the MPEG4 video will not display when the user

sets FPS to <=5.

• Video and audio are sometimes out of sync on Instant Playback and Search & Retrieve in victor.

• Samsung SND 7080 gives a blurry / melting screen on victor at 320x180, 640x480, 800x600,

800x450 and 1920x1080 resolutions on H264 stream. This is a confirmed issue with Samsung

due to a multi-slice algorithm which is not supported by the NVR. Enabling a second stream or

an audio stream fixes this. Samsung have confirmed this and it may also affect. SNB-5000,

SND-5080, SND-5080F, SNV-5080, SNV-5080R, SNV-5010, SNO-5080R, SNB-7000, SND-

7080F, SNV-7080, SNV-7080R, SNP5200, SNO-7080R, SNP6002.

• Samsung SND 7080 shows an incorrect TimeStamp on Victor when on single stream. This is

also due to the multi-slice algorithm.

• PTZ Controls will not work on the SNP 3120 using 1.26_120402 firmware. This is a camera

firmware bug.

• Quickly adding PTZ presets caused the SNP 5200 to auto zoom in.

• NVR has a known limitation. Right after adding the camera into the NVR, enable second stream

(by enabling Live, Record, Alarm or Analytics), and then click “Apply”, the NVR will report an

error message like: “Could not get unused Stream for Stream 2, codec H264”. This is because

Samsung handler does not support H264+H264 but the NVR wants to use this group. To avoid

this issue, after enabling the second stream, the user must change the codec type so it is a

different codec to Stream 1.

• Changing property may fail to update correctly if the following operations are done together,

before clicking [Apply] button: enable secondary stream, change the codec type to MJPEG,

change the property (FPS, resolution, etc). If this issue occurs, change the property again.

Special Points

• Some cameras (SNP-3430H, SND-3082, SNB-2000, SNB-3000, SNV-3080) have big

differences to the key camera which were confirmed by the vendor. The handler changed the

key camera or used Generic camera to represent them. Because we don't have these cameras

for testing, there is a risk.

• If added into an NVR, cameras should not be modified outside of the NVR, or the NVR may not

work properly.

• As confirmed by Samsung, F/W upgrade/downgrade problems happen frequently with SNP-

3120 series. Please use the Supported Firmware Version only, and be careful when upgrading /

downgrading camera of SNP-3120 series. Downgrading to 1.22_110120_1 firmware also resets

the camera to default IP.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108

No comments

Bosch VG5-825-ETEV Specifications Page 103