Bosch VG5-825-ETEV Specifications download pdf (Page 86)

FLIR

26-4 Camera Handler Release Notes

Setup

D-Series D-Series camera returns incorrect firmware version number in the

IRDeviceVersionGet CGI response. Camera firmware version number is only

available on the main page of the camera’s web configuration tool. The camera

firmware version number displayed on NVR is incorrect.

F-Series Video image streamed from a F-Series camera always has a big border when being

displayed on NVR and Victor Client.

F-Series

D-Series

PT-Series

Video image of moving objects looks interlaced on Quick Time and Java Applet Web

Browser. The interlacing may only have minimal effect on the Victor Client with no

noticeable effect to the Victor Client image. The interlacing will noticeably affect the

Image displayed on the NVR Live View and Java Applet on the Alarms page.

Step Setting up a new camera

1 Models: PT-Series/D-Series/F-Series

Reset the camera to manufacturing default

Open Camera Web Browser

Select Configuration File

Go to Factory Backup & Recovery Window

Select Restore to restore camera to “factory defaults”

2 Models: PT-Series/D-Series/F-Series

Adding CGI Interface

The FLIR camera’s CGI Interface must be enabled through Camera Web

Configuration Tool. This step must be performed before setting up a FLIR

camera’s IP address on NVR.

Steps for enabling the "Nexus CGI Interface"

Open Camera Web Browser:

Select “communications”

Select “Network Remote /VMS”

On Interface Configuration Page Select “Nexus CGI Interface”.

Select “Add”

Click Create.

Click Save.

Stop Server

Start Server.

Note on port number for Nexus Interface:

Port 8080 is the designated port for communication between NVR and

FLIR camera server (Nexus Server).

Port is automatically set to “8080” by default

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 107 108

No comments

Bosch VG5-825-ETEV Specifications Page 86