Bosch ITS-DX4020-G Specifications download pdf (Page 37)

GPRS/GSM IP Communicator Firmware Upgrade | en 37

Bosch Security Systems, Inc. Installation and Operation Guide F01U133268 | 03 | 2010.05

e. Open the Ports (COM & LPT) node.

If the ITS-DX4020-G is connected to the computer, it appears in this list with its

COM port assignment next to it.

If the ITS-DX4020-G is not connected to the computer, or the USB driver is not

installed, the ITS-DX4020-G does not appear in this list.

5. After the connection is established, press the [Enter] key.

The ITS-DX4020-G USB login window opens. Refer to Figure 6.1, Page 37.

Figure 6.1 USB Login Window

6. Enter the password to log on. The default password is 4020G (all uppercase).

The user interface allows three attempts to enter the password correctly. After three

failed attempts, you must reset the ITS-DX4020-G by removing the jumper plug from the

CONFIG MODE jumpers.

7. Press [Enter] to continue. The USB main menu opens.

8. Select option 7 Upgrade Firmware.

9. Press [Enter]. Hyper Terminal asks you to start the Xmodem transfer of the upgrade

image file.

10. From the menu bar, click Transfer>Send File.

The Send File dialog box opens.

Figure 6.2 Hyper Terminal Send File Dialog Box

11. Click Browse. Navigate to and highlight the downloaded ITS-DX4020-G binary file.

12. In Protocol, select Xmodem.

13. Click Send to start the firmware upgrade. The Xmodem file send for ITS-DX4020-G

dialog box opens and indicates the upgrade progress. Refer to Figure 6.3, Page 38.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 51 52

No comments

Bosch ITS-DX4020-G Specifications Page 37