Bosch D9112B User's Guide download pdf (Page 14)

Fire Trouble Events

When a fire trouble occurs, your command center emits three

warble tones, then a pause (repeatedly).

The system displays the number of fire points with troubles (A1

## FIRE TRBLE) and then custom text for each point.

Silencing Fire Troubles

Entering a personal passcode with the proper authority level

silences a fire trouble and disarms the panel if it was armed. If

you wish to clear the scrolling trouble message from the display,

enter COMMAND 4. If you wish to review these cleared troubles,

this can be done by using COMMAND 40.

Special Fire Trouble Display

If you silence the command center or clear a trouble for a Fire

Point from the display and the fire point remains in trouble,

FIRE TROUBLE appears in the command center’s display. FIRE

TROUBLE remains in the display until the condition causing

the trouble is cleared.

Note: Some fire points, when tripped, will display FIRE

TROUBLE for a preset amount of time. If no other fire

activity is detected, this condition will automatically

clear. If the condition remains or another fire detector

is tripped, a fire alarm will occur.

Viewing Fire Troubles

After you enter your passcode, the text of the fire point in trouble

continues to automatically scroll through the display. Press

NEXT to scroll these displays manually if you wish. Events scroll

from oldest to newest.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 55 56

No comments

Bosch D9112B User's Guide Page 14