Turning the System On (Arming)
Your security system can be turned on (armed) in many different
ways, depending on the arming command used. Arming
Commands are those commands used to turn the system on.
The most basic arming command is to arm the entire system.
The simplest way to arm your system is to enter your personal
passcode or COMMAND 1.
There are several other arming commands to turn the system on.
These are described later in this guide.
To Turn Your Security System On (Arm):
1. Enter your passcode and press ENT.
2. The command center briefly displays ARMING, and the
exit delay tone begins. After exit delay time expires, the
display changes to idle armed text.
Comments to this Manuals