Bosch D9112B User's Guide download pdf (Page 33)

VIEW MEMORY ?

View Event Memory

Description

Your system stores events that occurred since the last time

memory was cleared. Use COMMAND 40 to view Event

Memory.

Event Memory allows you or a service technician to review events

after they are cleared from the command center’s display. ALARM

SILENCED may scroll to remind you that events are stored in

Event Memory.

Each time you turn the system on, the Event Memory is erased

and the ALARM SILENCED message is cleared.

Using View Memory:

1. Ensure your command center shows idle disarmed text.

2. Press the COMMAND bar. The display shows SYSTEM

COMMAND.

3. Press the 4 key, followed by the 0 key.

Note: If you prefer, you may use the Command Menu in place

of steps 2 and 3 to initiate this function. Press the MENU

key to enter the Command Menu, then press NEXT

repeatedly until you reach the VIEW MEMORY ?

prompt. Press ENT.

4. Your system displays event summary lines and point text

in this order: fire alarm summary line, point text for each

fire alarm event; alarm summary line, point text for each

alarm event; fire trouble summary line, point text for each

fire trouble event; trouble summary line, and point text for

each trouble event. Press NEXT to scroll through the events.

If there are no events to view, NO EVENTS displays.

5. Return to idle text at any time by pressing ESC.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 55 56

No comments

Bosch D9112B User's Guide Page 33