Bosch D9112B User's Guide download pdf (Page 21)

Turning the System On (Arming) With

Doors or Windows Open

If a protected door or window is open, you may have the option

of “force arming” with that point faulted. Faulted points (opened

doors or windows) that are force armed are not included in the

system. The remaining points arm normally.

Force armed points either return to normal operation after you

turn off your system or return to normal when the door or

window is closed. Your system might not offer force arming or it

may be restricted to specific points. Contact your security

company for more information.

1. Use your passcode or an arming function to start the

arming process.

2. The display shows CHK AREA X.

3. Press NEXT repeatedly to scroll through the point text

for each faulted point. FORCE ARM displays after the

text for the last faulted point.

Press the COMMAND bar to display FORCE ARM before

you reach the text for the last point.

Turning the System On (Arming) With a

Duress Passcode

Your passcode may have a special duress feature that is simply

your personal passcode with its last digit increased by 1 or 2.

If an intruder demands that you arm or disarm the security

system, you can use your duress passcode. The duress passcode

arms or disarms the system and sends an alarm report to your

security company. There is no alarm tone or visual indication at

the premises that the report is sent. Check with your security

company before attempting to use this feature.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 55 56

No comments

Bosch D9112B User's Guide Page 21