Bosch D9112B User's Guide download pdf (Page 23)

MASTER ARM ?

Turn the Entire System On With Delays

Description

Use this function to turn on the entire system, both perimeter

and interior. When you turn the system on, the display shows

how many seconds of exit delay time you have to exit the protected

area. You should leave before exit delay time expires.

Leaving after exit delay expires causes entry delay to start. You

may also cause an alarm on an interior device. Enter your personal

passcode to disarm the system.

This function may be used by your cleaning service, a serviceman,

or others to turn on your system when they leave.

Using Master Arm:

1. The display shows disarmed idle text.

2. Press the COMMAND bar. The display shows SYSTEM

COMMAND.

3. Press the 1 key.

Note: If you prefer, you may use the Command Menu in place

of steps 2 and 3 to initiate this function. Press the MENU

key to enter the Command Menu, then press NEXT

repeatedly until you reach the MASTER ARM ? prompt.

Press ENT. MASTER ARM ALL ? displays. Press ENT.

4. The display shows ARMING for two seconds, then

displays EXIT NOW # (# = exit delay time remaining).

After the exit delay time expires, the display changes to

idle armed text.

5. To disarm your security system, enter your personal

passcode and press ENT.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 55 56

No comments

Bosch D9112B User's Guide Page 23