Bosch D9112B User's Guide download pdf (Page 6)

Command Center Function Keys

Your command center has five function keys. These keys are used

to control your system.

COMMAND

Use the COMMAND bar in combination with one or two

numeric keys to perform a function.

ENT/YES

The ENT (Enter)/YES key has two functions. The first is to

complete the entry of your passcode at the command enter. When

ever a function requires that you enter your passcode at the

command center, first press the digits of the code and then press

the ENT key. Your system will not recognize your passcode until

you press ENT.

The second function of the ENT/YES key is to select the menu

item displayed. Some menu items require your personal passcode

be entered before starting the function. Remember to press ENT

after entering your passcode.

ESC/MENU

The ESC (Escape)/MENU key has two functions. First, the ESC/

MENU key is used to enter the Command Menu. Pressing this

key when at idle text takes you to the first item in the menu.

Second, pressing ESC will take you back to the idle display.

PREV (Previous)

When viewing a list, pressing the PREV key will take you back to

the previously shown item.

Press the NEXT key to pass over the present item in a menu or

list.

1 2 3 4 5 6 7 8 9 10 11 ... 55 56

No comments

Bosch D9112B User's Guide Page 6