Bosch D6100IPv6 Installation Guide Page 26

  • Download
  • Add to my manuals
  • Print
  • Page
    / 49
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 25
Conettix D6600/D6100IPv6 |
Program Entry Guide | 3.0 Line Card
Configuration
26
Bosch Security Systems, Inc. | 11/12 | 4998122702-07
3.1.2 Phone Supervision
3.1.2.1 Line Sniff
Default: 1
Selections: 0 to 2
0 Disable phone line supervision.
1 Enable phone line supervision.
2 Disable phone line supervision and disable
Busy Seconds Report.
This entry enables or disables phone line supervision.
If Line Sniff is 0 (disabled) and the phone line is
disconnected or out of service, the OL/LF LED on
the PSTN Line Card is clear.
If Line Sniff is 1 (enabled) and the phone line is
disconnected or out of service, the OL/LF LED on
the PSTN Line Card is either red or yellow, and a
LINE TROUBLE message appears on the
display. The message is also printed and sent to
the automation system PC.
If Line Sniff is 2 (also disabled) and the phone
line is disconnected or out of service, the OL/LF
LED on the PSTN Line Card is clear and disables
the Busy Seconds Report. Refer to
D6600/D6100IPv6 Operation in the
D6600/D6100IPv6 Operation and Installation
Guide (P/N: 4998122704). Set the Line Sniff to 1
when used in UL Listed central stations.
Table 9: OL/LF LED Status
LED
State
Cause
OL/LF
Off
Telephone line normal
Green Telephone line picked up
Flashes
green
Incoming call
3.1.2.2 Maximum On Line Time (minutes)
Default: 5
Selections: 1 to 9
The maximum period a call can be online. This
prevents a busy line caused by nonsense data or
repeated messages. This entry will not affect the Two
Way Audio Duration (refer to Menu Item 3.1.4.1
Duration on page 31).
3.1.2.3 Ring Count
Default: 1
Selections: 1 to 9
The number of rings detected before the
D6600/D6100IPv6 answers the line. If Caller ID is
being used, this parameter may need to be set to a 2
for proper operation in some cases
3.1.3 Line Formats
3.1.3.1 Five Digits
Default: 4
Selections: 1 to 4
1 3x1 Checksum: Three-digit account
number, 1 zone digit, and 1 checksum digit
2 3x2 Double Round: Three-digit account
number, 1 group digit, and 1 zone digit
3 4x1 Double Round: Four-digit account
number, and 1 zone digit
4 Auto Config: If the pulse speed is 40 pps, it
is 3x1 Checksum, otherwise 4x1 Double
Round.
This entry determines how the D6600/D6100IPv6
interprets and shows the information from a control
panel transmitting a five-digit format.
3.1.3.2 Six Digits
Default: 1
Selections: 1 to 3
1 4x2 Double Round: Four-digit account
number, 1 group digit, and 1 zone digit
2 3x2 Checksum: Three-digit account
number, 1 group digit, 1 zone digit, and 1
checksum digit
3 4x1 Checksum: Four-digit account
number, 1 zone digit, and 1 checksum digit
This entry determines how the D6600/D6100IPv6
interprets and shows the information from a control
panel transmitting a six-digit format.
Page view 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 48 49

Comments to this Manuals

No comments