Bosch D6100IPv6 Installation Guide download pdf (Page 34)

Conettix D6600/D6100IPv6 |

Program Entry Guide | 3.0 Line Card

Configuration

Bosch Security Systems, Inc. | 11/12 | 4998122702-07

A signal must possess all three

attributes (account number, event code,

and zone code) to trigger a TWA

session.

For example:

• 4-2 Alarm 123456 activates a TWA session

• 4-2 Alarm 123466 does not activate a TWA

session

3.1.5 Line Identification

3.1.5.1 Caller ID

Default: 0

Selections: 0 to 3

0 Disable Caller ID.

1 Output Caller ID to Automation and Printer.

2 Output Caller ID to Printer only.

3 Output Caller ID to Automation and Printer only

on No Data Received or Data Error.

Caller ID still appears at the LCD when

1, 2, or 3 is selected.

3.1.5.2 Caller Name

Default: 0

Selections: 0 or 1

0 Disable Caller Name.

1 Send Caller Name to the printer only.

Caller Name still appears at the LCD

when 1 is selected.

3.1.5.3 DNIS (D6600 Only)

A Dialed Number Identification Service (DNIS)

number can be 4 to 11 digits. A 2000 DNIS number

database can automate communication settings.

Database-supported settings:

• Handshake 1-8

• Five-Digit

• Six-Digit

• 4-1 Extended

• 4-2 Extended

• Seven-Digit

• 4-1 Express

• Pulse Wait

• Digit Wait

• Round Wait

• Ademco High Speed

Checksum

• BFSK Extended

• 3-1 Extended

• 3-1 Restore Report in

High Speed

• Extended Format Report

in High Speed Format

• Tone Duration

• Handshake Wait

Default: 0

Selections: 0 to 1

0 Disable

1 Enable

2 Enable DNIS, database DNIS only

If enabled using 1, a DNIS number is sent to the

automation PC and the printer. If there is no DNIS

number or a DNIS error, the output DNIS D is

followed by zeros equaling the length of the previous

valid DNIS. The output contains four zeros if there

was no previous valid DNIS.

If enabled using 2, only valid DNIS numbers in the

database are processed. If no DNIS number, an

invalid number, or a DNIS number not in the database

is received, the system disconnects the call.

3.1.5.4 ANI (D6600 Only)

Default: 0

Selections: 0 or 1

0 Disable

1 Enable, use sequence DNIS+ANI when

DNIS is available

2 Enable, use sequence ANI+DNIS when

DNIS is available

3.1.5.5 DNIS Digits

Default: 0

Selections: 0 to 11

Use this option to set allowed DNIS digits. This

option works with Options 3.1.5.3 DNIS and

3.1.5.4 ANI to prevent invalid DNIS/ANI signals.

0 No preset DNIS digits. Auto identify

according to Option 3.1.5.3 and 3.1.5.4

1 to 4 4 DNIS digits

5 to 11 The number of allowed DNIS digits

3.1.6 Reserved Feature

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 48 49

Comments to this Manuals

No comments

Bosch D6100IPv6 Installation Guide Page 34

Comments to this Manuals

Related products and manuals for Car media receivers Bosch D6100IPv6