Bosch D6100IPv6 Installation Guide download pdf (Page 42)

Conettix D6600/D6100IPv6 |

Program Entry Guide | 6.0 Network Configuration

Bosch Security Systems, Inc. | 11/12 | 4998122702-07

6.2.4 COM1 Stop Bit

Default: 1

Selections: 1 or 2

Select the stop bit value for COM1.

6.2.5 Network Adapter

Default: 0

Selections: D6600: 0 to 3

D6100IPv6: 0 or 2

0 Disable network adapter connection.

1 Enable network adapter connection for

D6600 with D6680 or D6100IPv6.

Enable network adapter connection for

D6600 with D6682 or D6100IPv6.

Enable network adapter connection for

D6600 with D6686.

6.2.6 Network Encryption Enabled

Default: 0

Selections: 0 or 1

0 Disable COM1 Network Encryption.

1 Enable COM1 Network Encryption.

6.3 Network Automation Connection

This section details connecting the D6600 or

D6100IPv6 to the network using the COM4 port

(D6600) or integrated Ethernet port (D6100IPv6).

Parameters programmed in this section

override other COM3 settings

programmed in other sections.

If the PC running the automation

software is using DHCP to get an IP

Address, the server might change the IP

address. If this occurs, the automation

software can no longer communicate

with the receiver until the receiver is

programmed with the new IP address

assigned to the automation PC. To

avoid this, use a static IP address for

the PC running the automation software.

6.3.1 IP Address

Selections:

[IPv4] xxx.xxx.xxx.xxx

[IPv6]

xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx

The IP Address of the computer running the

automation software must be set to a unique value in

order to distinguish it from other stations in the

network.

“UP” key”∆” for “.”, and “DOWN” key for

“:”

6.3.2 Port

Default: 10000

Selections: 1 to 65535

This entry is reserved unless a COM4 and/or a COM1

network adapter is enabled (Section 6.1.5 or Section

6.2.5 is not set to 0) and Datagram 02 is enabled

(Section 6.8.6 is set to 1). When this entry is

available, set it to the port number of the computer

running the automation software.

Typically, the port numbers 0 to 1023

are reserved in UNIX systems for

specific applications. Use numbers

ranging from 2000 to 30000 to avoid

conflicts.

6.3.3 Polling Interval

Default: 30

Selections: 0 to 255

Designate the polling interval in seconds to the

automation software.

6.3.4 Retry Number

Default: 4

Selections: 0 to 5

Select the number of retransmission attempts in case

of communications trouble.

6.3.5 ACK Wait

Default: 04

Selections: 01 to 60

Enter the time (in seconds) the D6600 waits for the

ACK message from the automation software.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 48 49

Comments to this Manuals

No comments

Bosch D6100IPv6 Installation Guide Page 42

Comments to this Manuals

Related products and manuals for Car media receivers Bosch D6100IPv6