Bosch GBH 14.4 V-LI Compact Professional Operations Instructions download pdf (Page 9)

English | 9

Bosch Power Tools 1 609 929 X37 | (8.4.11)

pack may create a risk of fire when used with another bat-

tery pack.

f Use power tools only with specifically designated bat-

tery packs. Use of any other battery packs may create a

risk of injury and fire.

f When battery pack is not in use, keep it away from oth-

er metal objects, like paper clips, coins, keys, nails,

screws or other small metal objects, that can make a

connection from one terminal to another. Shorting the

battery terminals together may cause burns or a fire.

f Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally oc-

curs, flush with water. If liquid contacts eyes, addition-

ally seek medical help. Liquid ejected from the battery

may cause irritation or burns.

Service

f Have your power tool serviced by a qualified repair per-

son using only identical replacement parts. This will en-

sure that the safety of the power tool is maintained.

Hammer Safety Warnings

f Wear ear protectors. Exposure to noise can cause hear-

ing loss.

f Hold power tool by insulated gripping surfaces, when

performing an operation where the cutting accessory

or fastener may contact hidden wiring. Cutting accesso-

ry and fasteners contacting a “live” wire may make ex-

posed metal parts of the power tool “live” and could give

the operator an electric shock.

Additional Safety and Working

Instructions

f When transporting and storing, set the rotational di-

rection switch to the centre position. Danger of injury

when accidentally actuating the On/Off switch.

f Use appropriate detectors to determine if utility lines

are hidden in the work area or call the local utility com-

pany for assistance. Contact with electric lines can lead

to fire and electric shock. Damaging a gas line can lead to

explosion. Penetrating a water line causes property dam-

age.

f When working with the machine, always hold it firmly

with both hands and provide for a secure stance. The

power tool is guided more secure with both hands.

f Secure the workpiece. A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.

f For drilling without impact in wood, metal, ceramic and

plastic as well as for screwdriving, tools without SDS-plus

are used (e.g., drills with cylindrical shank). For these

tools, a keyless chuck or a key type drill chuck are re-

quired.

f Inserting SDS-plus Drilling Tools: Check the latching by

pulling the tool.

f Replace a damaged dust protection cap immediately.

The dust protection cap largely prevents the penetration of

drilling dust into the tool holder during operation. When in-

serting the tool, pay attention that the dust protection cap

is not damaged.

f Dusts from materials such as lead-containing coatings,

some wood types, minerals and metal can be harmful to

one’s health and cause allergic reactions, lead to respi-

ratory infections and/or cancer. Materials containing as-

bestos may only be worked by specialists.

– As far as possible, use a dust extraction system suita-

ble for the material.

– Provide for good ventilation of the working place.

– It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the

materials to be worked.

f Prevent dust accumulation at the workplace. Dusts can

easily ignite.

f If the application tool should become blocked, switch

the machine off. Loosen the application tool.

f When switching on with a blocked drilling tool, high

torque reaction can occur.

f Always wait until the machine has come to a complete

stop before placing it down. The tool insert can jam and

lead to loss of control over the power tool.

f Avoid unintentional switching on. Ensure the On/Off

switch is in the off position before inserting battery

pack. Carrying the power tool with your finger on the

On/Off switch or inserting the battery pack into power

tools that have the switch on invites accidents.

f Do not open the battery. Danger of short-circuiting.

Protect the battery against heat, e. g., against

continuous intense sunlight, fire, water, and

moisture. Danger of explosion.

f In case of damage and improper use of the battery, va-

pours may be emitted. Provide for fresh air and seek

medical help in case of complaints. The vapours can irri-

tate the respiratory system.

f Use the battery only in conjunction with your Bosch

power tool. This measure alone protects the battery

against dangerous overload.

f Use only original Bosch batteries with the voltage list-

ed on the nameplate of your power tool. When using oth-

er batteries, e. g. imitations, reconditioned batteries or

other brands, there is danger of injury as well as property

damage through exploding batteries.

f The battery is supplied partially charged. To ensure full

capacity of the battery, completely charge the battery

in the battery charger before using your power tool for

the first

time.

f Read the operating instructions of the battery charger.

f Check the tight seating of the battery. Two locking lev-

els are possible.

OBJ_DOKU-26212-001.fm Page 9 Friday, April 8, 2011 1:29 PM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 144 145

Comments to this Manuals

No comments

Bosch GBH 14.4 V-LI Compact Professional Operations Instructions Page 9

Comments to this Manuals

Related products and manuals for Cordless rotary hammers Bosch GBH 14.4 V-LI Compact Professional