Bosch D7412G User Manual download pdf (Page 75)

D9412G/D7412G | Program Entry Guide | 3.0 RADXUSR1/RADXUSR2 EN | 75

Bosch Security Systems | 1/04 | 47775E

A silence bell authority is built into all

authority levels, even if they are the default

and none of the available programmable

functions are enabled. A user passcode

can silence a Fire/Burg bell as long as any

authority level is assigned to the area

where the bell can be silenced.

U### User Group

Default: Blank

Selection: Blank, 1 to 8

Use this parameter to create a group of up to 249

users (99 for the D7412G) whose combinations can

be enabled/disabled using an automatic user

window. This is the number entered into the

User Group

for any active

W# User Window

Multiple windows can be programmed for one user

group (up to eight) within one 24-hour period. For

example, if User Group 1 has a window running

from 8:00 AM (start time) to 4:00 PM (stop time),

the users for that group may use their passcodes only

between that time. Between 4:00 PM that day and

8:00 AM the next day, the users may not use their

passcodes.

0101

To enable this user’s passcode at all times,

leave U### User Group blank.

User Group Window times cannot be changed from

the command center. Once a window is assigned to

a user group, the users in that group rely on the

window to be active (within the start and stop times)

for their passcodes to function. The only way to

disable the window is by reprogramming the control

panel from the D5200 or RAM.

U### Area 1 [through Area 8] Auth

Default: See

Program Record Sheet

Selection: 1 to 14 or Blank

Assign an authority level to the user for this area.

Blank means the user has no authority in this area.

U### Name

Default: See

Program Record Sheet

Selection: Sixteen alphanumeric characters

Enter Alphabetic-characters A to Z in capital letters

Period (.), comma (,), percent (%), parentheses [()],

equal (=), greater/less than (<>), exclamation (!),

braces ({}), apostrophe (’), carat (^), grave accent (`),

tilde (~), semi-colon (;), and colon (:) are not

allowed.

Enter up to sixteen characters of text for this user

group.

Programming this group with a

departmental, team, or function name

identifies all the users in this group in a

function related manner, such as

ENGINEERING.

Card Data Format

The D9412G/D7412G and D9210B Controller

comply with the 26-BIT Wiegand card data format.

In essence, the format consists of 26 bits (3.2 bytes)

of data. The first bit is used for the even parity. The

next 8 bits (first byte) is used for the

U### Site

Code

. The next 16 bits (second and third byte) are

used for the

U### Card Data

. The last bit is used

for the odd parity.

As long as the reader and tokens/cards you are using

are 26-BIT Wiegand compatible, they function with

this system.

Use only the readers identified as being compatible

with the D9210B door control module. Information

on these readers can be found in the D9210B O/I

Manual.

For more information, see the Security Industry

Association (SIA) Access Control 26-BIT Wiegand

Reader Interface Standard.

U### Mstr Site

Default: Blank

Selection: 000 = (0) to 254 or Blank (255)

Master User ### Site Data

Enter the first three decimal numbers on the back of

the token/card. This is the first byte (bits 2 through

9) of data for a 26-bit Wiegand card. This is called

the site number. Tokens/cards with a site code of

255 are not compatible with the D9412G/D7412G

Control Panels.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 141 142

Comments to this Manuals

No comments

Bosch D7412G User Manual Page 75

Comments to this Manuals

Related products and manuals for Fire protection Bosch D7412G